Description (Amf Container) - Allied Telesis x510-28GTX Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT
( )
DESCRIPTION AMF CONTAINER

description (amf container)

Overview Use this command to set the description on an AMF container on a Virtual AMF
Appliance (VAA).
An AMF container is an isolated instance of AlliedWare Plus with its own network
interfaces, configuration, and file system. The features available inside an AMF
container are a sub-set of the features available on the host VAA. These features
enable the AMF container to function as a uniquely identifiable AMF master and
allows for multiple tenants (up to 60) to run on a single VAA host. See the
AMF Feature Overview and Configuration Guide
multiple tenants on a single VAA host.
Use the no variant of this command to remove the description from an AMF
container.
Syntax description <description>
no description
Mode AMF Container Configuration
Example To set the description for AMF container "vac-wlg-1" to "Wellington area", use the
commands:
awplus#
awplus(config)#
awplus(config-atmf-container)#
To remove the description for AMF container "vac-wlg-1", use the commands:
awplus#
awplus(config)#
awplus(config-atmf-container)#
Related atmf container
Commands
show atmf container
Command Version 5.4.7-0.1: command added
changes
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK OMMANDS
Parameter Description
<description>
Enter up to 128 characters of text describing the AMF container.
configure terminal
atmf container vac-wlg-1
configure terminal
atmf container vac-wlg-1
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
for more information on running
description Wellington area
no description
2325