Show Ntp Associations - Allied Telesis x510-28GTX Command Reference Manual

NTP C
OMMANDS

SHOW NTP ASSOCIATIONS

show ntp associations
Overview Use this command to display the status of NTP associations.
show ntp associations
Syntax
Mode User Exec and Privileged Exec
Example See the sample output of the show ntp associations command displaying the
status of NTP associations.
Table 1: Example output from the show ntp associations command
awplus#show ntp associations 
remote
==============================================================================
*server1.example.com
.GPS.
-server2.example2.com
192.0.2.2
192.0.2.1 .INIT.
+server3.example3.com
.GPS.
* system peer, # backup, + candidate, - outlier, x false ticker
Table 2: Parameters in the output from the show ntp associations command
C613-50170-01 Rev B
refid st t when poll reach
1 u
2 u
16 s
1 u
Parameter Description
* system
The peer that NTP uses to calculate variables like the offset and root
peer
dispersion of this AlliedWare Plus device. NTP passes these variables
to the clients using this AlliedWare Plus device.
# backup
Peers that are usable, but are not among the first six peers sorted by
synchronization distance. These peers may not be used.
+
Peers that the NTP algorithm has determined can be used, along
candidate
with the system peer, to discipline the clock (i.e. to set the time on
the AlliedWare Plus device).
- outlier
Peers that are not used because their time is significantly different
from the other peers.
x false
Peers that are not used because they are not consider trustworthy.
ticker
space
Peers that are not used because they are, for example, unreachable.
remote
The peer IP address
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
delay
- 256 377 15.126
173 256 377 28.172
- 1024 0 0.000
205 256 377 27.144
offset jitter
1.103 0.454
-4.599 0.219
0.000 0.000
0.775 0.193
2560