Dns-Server (Dhcpv6) - Allied Telesis x510-28GTX Command Reference Manual

DHCP IP 6 (DHCP 6) C
FOR V V OMMANDS
- (DHCP 6)
DNS SERVER V

dns-server (DHCPv6)

Overview Use this command to add a Domain Name System (DNS) server to the DHCPv6
address pool you are configuring. You can use this command multiple times to
create a list of DNS name servers available to the client. This sets the DNS server
details using the pre-defined option 6. Note that if you add a user-defined option
6 using the
with this command.
Use the no variant of this command to remove either the specified DNS server or
all DNS servers from the DHCPv6 pool.
dns-server <ipv6-address>
Syntax
no dns-server [<ipv6-address>]
Mode DHCPv6 Configuration
Examples To add the DNS server with the assigned IPv6 address
2001:0db8:3000:3000::32 to the DHCPv6 server pool named P2, use the
following commands:
awplus#
awplus(config)#
awplus(dhcpv6-config)#
To remove the DNS server with the assigned IPv6 address
2001:0db8:3000:3000::32 from the DHCPv6 server pool named P2, use the
following commands:
awplus#
awplus(config)#
awplus(dhcpv6-config)#
To remove all DNS servers from the DHCPv6 server pool named P2, use the
following commands:
awplus#
awplus(config)#
awplus(dhcpv6-config)#
C613-50170-01 Rev B
option (DHCPv6)
Parameter Description
<ipv6-address>
Specify an IPv6 address of the DNS server, in hexadecimal
notation in the format X:X::X:X. This parameter is required
when adding a DNS server to the DHCPv6 address pool. All
DNS servers are removed from the DHCPv6 pool if you enter
the no dns-server command without this parameter.
configure terminal
ipv6 dhcp pool P2
configure terminal
ipv6 dhcp pool P2
configure terminal
ipv6 dhcp pool P2
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
command, then you will override any settings created
dns-server 2001:0db8:3000:3000::32
no dns-server 2001:0db8:3000:3000::32
no dns-server
2504