State - Allied Telesis x510-28GTX Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

STATE

state
Overview This command sets the running state of an AMF container on a Virtual AMF
Appliance (VAA).
An AMF container is an isolated instance of AlliedWare Plus with its own network
interfaces, configuration, and file system. The features available inside an AMF
container are a sub-set of the features available on the host VAA. These features
enable the AMF container to function as a uniquely identifiable AMF master and
allows for multiple tenants (up to 60) to run on a single VAA host. See the
AMF Feature Overview and Configuration Guide
multiple tenants on a single VAA host.
state {enable|disable}
Syntax
Default By default, state is disabled.
Mode AMF Container Configuration
Usage The first time the state enable command is executed on a container it assigns the
container to an area and configures it as an AMF master. This is achieved by
automatically adding the following configuration to the AMF container:
For this reason the state enable command should be run after the container has
been created with the
the
Once the start-up configuration has been saved from within the AMF container, all
further configuration changes need to be made manually.
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK OMMANDS
Parameter Description
disable
Stop the AMF container. The container's state changes to
stopped.
enable
Start the AMF container. The container's state changes to
running.
atmf network-name <AMF network-name>
atmf master
atmf area <container area-name> <container area-id> local
atmf area <container area-name> password <container area-password>
atmf area <host area-name> <host area-id>

interface eth0
atmf-arealink remote-area <host area-name> vlan 4094
atmf container
area-link command.
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
for more information on running
command and an area-link configured with
2416