Service Dhcp-Server - Allied Telesis x510-28GTX Command Reference Manual

D H C
YNAMIC OST ONFIGURATION
-
SERVICE DHCP SERVER

service dhcp-server

Overview This command enables the DHCP server on your device. The server then listens for
DHCP requests on all IP interfaces. It will not run if there are no IP interfaces
configured.
The no variant of this command disables the DHCP server.
Syntax service dhcp-server
no service dhcp-server
Mode Global Configuration
Example To enable the DHCP server, use the commands:
awplus#
awplus(config)#
Related ip dhcp pool
Commands
show ip dhcp server summary
subnet-mask
C613-50170-01 Rev B
P (DHCP) C
ROTOCOL OMMANDS
configure terminal
service dhcp-server
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2473