Show Atmf Secure-Mode Audit - Allied Telesis x510-28GTX Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT
-
SHOW ATMF SECURE MODE AUDIT

show atmf secure-mode audit

Overview Use this command to detect security vulnerabilities on a node.
show atmf secure-mode audit
Syntax
Mode Privileged Exec
Example To display AMF secure mode link audits for a node, use the command
awplus#
Output Figure 54-27: Example output from show atmf secure-mode audit
ATMF Secure Mode Audit:

Warning : The default username and password is enabled.
Good : SNMP V1 or V2 is disabled.
Warning : Telnet server is enabled.
Good : ATMF is enabled. Secure-Mode is on.
Good : ATMF Topology-GUI is disabled. No trustpoints configured.

ATMF Secure Mode Log Events:

-------------------------------------------------------------------------
2017 Feb 2 00:59:25 user.notice node1 ATMF[848]: Sec_Audit - ATMF Secure
Mode is enabled.
2017 Feb 2 01:30:00 user.notice node1 ATMF[848]: Sec_Audit - Established
secure connection to area_1_node_1 on interface vlink1.
Table 54-3: Parameters in the output from show atmf secure-mode audit link
Related show atmf secure-mode
Commands
Command Version 5.4.7-0.3: command added
changes
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK OMMANDS
show atmf secure-mode audit
Parameter
ATMF Secure Mode
Audit
ATMF Secure Mode
Log Events
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
A list of security recommendations to secure the AMF
network. Items prefaced with Warning need to be fixed.
In the sample above the default username and password,
and telnet, should be disabled.
A list of recorded secure mode log events.
2397