Clear Atmf Secure-Mode Certificates - Allied Telesis x510-28GTX Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT
-
CLEAR ATMF SECURE MODE CERTIFICATES

clear atmf secure-mode certificates

Overview Use this command to remove all certificates from an AMF member or master. AMF
nodes will need to be re-authorized once this command has been run.
clear atmf secure-mode certificates
Syntax
Mode Privileged Exec
Example To clear all certificates from an AMF node, use the command:
awplus#
If this is the only master on the network you will see the following warning:
On an AMF member you will see the following message:
Related atmf authorize
Commands
atmf secure-mode
show atmf authorization
show atmf secure-mode certificates
Command Version 5.4.7-0.3: command added
changes
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK OMMANDS
clear atmf secure-mode certificates
% Warning: This node is the only master in the network!
All the nodes will become isolated and refuse to join any ATMF
network. The certificates on all the isolated nodes must be
cleared before rejoining an ATMF network will be possible.

To clear certificates a reboot of the device is required.
Clear certificates and Reboot ? (y/n):
To clear certificates a reboot of the device is required.
Clear certificates and Reboot ? (y/n):
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2316