Show Atmf Group Members - Allied Telesis x510-28GTX Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

SHOW ATMF GROUP MEMBERS

show atmf group members
Overview This command will display all group memberships within an AMF working-set.
Each node in the AMF working set is automatically added to automatic groups
which are defined by hardware architecture, e.g. x510, x230. Nodes that are
configured as masters are automatically assigned to the master group. Users can
define arbitrary groupings of AMF members based on their own criteria, which can
be used to select groups of nodes.
show atmf group members [user-defined|automatic]
Syntax
Mode Privileged Exec
Example To display group membership of all nodes in a working-set, use the command:
ATMF_NETWORK[9]#
Table 58: Sample output from the show atmf group members command
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK OMMANDS
Parameter
user-defined
automatic
show atmf group members
ATMF Group membership

Automatic Total
Groups Members
----------------------------------------------------------------
master 1
poe 1
x510 3
x930 1
x8100 2

ATMF Group membership

User-defined Total
Groups Members
----------------------------------------------------------------
marketing
software
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
User defined group membership display.
Automatic group membership display.
Members
Building_1
HW_Team1
SW_Team1 SW_Team2 SW_Team3
HW_Team1
Building_1 Building_2
Members
1 Bld1_Floor_1
3 SW_Team1 SW_Team2 SW_Team3
2365