Show Atmf Nodes - Allied Telesis x510-28GTX Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

SHOW ATMF NODES

show atmf nodes
Overview This command displays nodes currently configured within the AMF network.
Note that the output also tells you whether or not node map exchange is active.
Node map exchange improves the tracking of nodes joining and leaving an AMF
network. This improves the efficiency of AMF networks. Node map exchange is
only available if every node in your AMF network is running version 5.4.6-2.1 or
later. We recommend running the latest version on all nodes in your network, so
you receive the advantages of node map exchange and other improvements.
show atmf nodes [guest|all]
Syntax
Mode Privileged Exec
Usage You can use this command to display one of three sets of nodes:
•
•
•
Examples To display AMF information for all nodes except guest nodes, use the command:
node1#
Table 54-1: Sample output from show atmf nodes
node1#show atmf nodes guest

Node Information:

* = Local device 

SC = Switch Configuration:
C = Chassis S = Stackable

Node
Name
--------------------------------------------------------------------------------
* M1
N3
N1

Node map exchange is active
Current ATMF node count 3
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK OMMANDS
Parameter Description
guest
Display only guest nodes in the AMF network.
all
Display all nodes in the AMF network, including guest nodes.
all nodes except guest nodes, by specifying show atmf nodes
all nodes including guest nodes, by specifying show atmf nodes all
only guest nodes, by specifying show atmf nodes guest
show atmf nodes
N = Standalone
Device
Type
x510-28GTX
x230-18GP
AR4050S
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
ATMF Parent
Master SC Domain
Y S none
N N M1
N N M1
Node 
Depth
0
1
1
2392