Ntp Commands; Introduction; Chapter 57: Ntp Commands - Allied Telesis x510-28GTX Command Reference Manual

57

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure
the Network Time Protocol (NTP). For more information, see the
Overview and_Configuration
The device can act as an NTP client to receive time from one or more NTP servers,
and as an NTP server.
For information on filtering and saving command output, see the
with AlliedWare_Plus" Feature Overview and Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50170-01 Rev B

NTP Commands

"ntp access-group (deprecated)" on page 2544
"ntp authenticate" on page 2545
"ntp authentication-key" on page 2546
"ntp broadcastdelay" on page 2547
"ntp discard" on page 2548
"ntp master" on page 2549
"ntp peer" on page 2550
"ntp restrict" on page 2552
"ntp server" on page 2554
"ntp source" on page 2556
"ntp trusted-key (deprecated)" on page 2558
"show counter ntp (deprecated)" on page 2559
"show ntp associations" on page 2560
"show ntp counters" on page 2562
"show ntp counters associations" on page 2564
"show ntp status" on page 2566
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Guide.
NTP Feature
"Getting Started
Guide.
2543