Ip Dhcp Bootp Ignore - Allied Telesis x510-28GTX Command Reference Manual

D H C
YNAMIC OST ONFIGURATION

IP DHCP BOOTP IGNORE

ip dhcp bootp ignore
Overview This command configures the DHCP server to ignore any BOOTP requests it
receives. The DHCP server accepts BOOTP requests by default.
The no variant of this command configures the DHCP server to accept BOOTP
requests. This is the default setting.
Syntax ip dhcp bootp ignore
no ip dhcp bootp ignore
Mode Global Configuration
Examples To configure the DHCP server to ignore BOOTP requests, use the commands:
awplus#
awplus(config)#
To configure the DHCP server to respond to BOOTP requests, use the commands:
awplus#
awplus(config)#
Related show ip dhcp server summary
Commands
C613-50170-01 Rev B
P (DHCP) C
ROTOCOL OMMANDS
configure terminal
ip dhcp bootp ignore
configure terminal
no ip dhcp bootp ignore
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2442