Show Atmf Authorization - Allied Telesis x510-28GTX Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

SHOW ATMF AUTHORIZATION

show atmf authorization
Overview Use this command on an AMF master to display the authorization status of other
AMF members and masters on the network.
On an AMF controller this command will show the authorization status of remote
area AMF masters.
Syntax show atmf authorization {current|pending|provisional}
Mode Privileged Exec
Example To display all authorized AMF nodes on an AMF controller or AMF master, use the
command:
awplus#
To display AMF nodes which are requesting authorization on an AMF controller or
AMF master, use the command:
awplus#
To display AMF nodes which have provisional authorization, use the command:
awplus#
Output Figure 54-10: Example output from show atmf authorization current
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK OMMANDS
Parameter Description
current
Show the status of all authorized nodes.
pending
Show the status of unauthorized nodes in the pending queue.
These are nodes that enabled secure mode with
secure-mode
authorize.
provisional
Show the status of provisionally authorized nodes. These are
nodes that have been provisioned with
show atmf authorization current
show atmf authorization pending
show atmf authorization provisional
NZ Authorized Nodes:
Node Name
----------------------------------------------------------------
master_1
area_1_node_1
area_1_node_2
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
but have not yet been authorized with
Signer
master_1
master_1
master_1
atmf
atmf
atmf authorize provision.
Expires
4 Mar 2017
4 Mar 2017
4 Mar 2017
2347