Ntp Authenticate - Allied Telesis x510-28GTX Command Reference Manual

NTP C
OMMANDS

NTP AUTHENTICATE

ntp authenticate
Overview This command enables NTP authentication. This allows NTP to authenticate the
associations with other systems for security purposes.
The no variant of this command disables NTP authentication.
Syntax ntp authenticate
no ntp authenticate
Mode Global Configuration
Examples To enable NTP authentication, use the commands:
awplus#
awplus(config)#
To disable NTP authentication, use the commands:
awplus#
awplus(config)#
C613-50170-01 Rev B
configure terminal
ntp authenticate
configure terminal
no ntp authenticate
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2545