Show Atmf Backup Area - Allied Telesis x510-28GTX Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

SHOW ATMF BACKUP AREA

show atmf backup area
Overview Use this command to display backup status information for the master nodes in
one or more areas.
Note that this command is only available on AMF controllers.
Syntax show atmf backup area [<area-name> [<node-name>]] [logs]
Mode Privileged Exec
Example To show information about backups for an area, use the command:
controller-1#
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK OMMANDS
Parameter Description
logs
Displays the logs for the last backup of each node.
<area-name>
Displays information about nodes in the specified area.
<node-name>
Displays information about the specified node.
show atmf backup area
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2354