Ntp Broadcastdelay - Allied Telesis x510-28GTX Command Reference Manual

NTP C
OMMANDS

NTP BROADCASTDELAY

ntp broadcastdelay
Overview Use this command to set the estimated round-trip delay for broadcast packets.
Use the no variant of this command to reset the round-trip delay for broadcast
packets to the default offset of 0 microseconds.
Syntax ntp broadcastdelay <delay>
no ntp broadcastdelay
0 microsecond offset, which can only be applied with the no variant of this
Default
command.
Mode Global Configuration
To set the estimated round-trip delay to 23464 microseconds for broadcast
Examples
packets, use these commands:
awplus#
awplus(config)#
To reset the estimated round-trip delay for broadcast packets to the default setting
(0 microseconds), use these commands:
awplus#
awplus(config)#
C613-50170-01 Rev B
Parameter Description
<delay>
<1-999999> The broadcast delay in microseconds.
configure terminal
ntp broadcastdelay 23464
configure terminal
no ntp broadcastdelay
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2547