Sntp-Address - Allied Telesis x510-28GTX Command Reference Manual

DHCP IP 6 (DHCP 6) C
FOR V V OMMANDS
-
SNTP ADDRESS

sntp-address

Overview Use this command in DHCPv6 Configuration mode to add an SNTP Server IPv6
address to a DHCPv6 Server pool.
Use the no variant of this command to remove an SNTP Server IPv6 address from a
DHCPv6 Server pool.
Syntax sntp-address <ipv6-address>
no sntp-address <ipv6-address>
Mode DHCPv6 Configuration
Examples The following example adds an SNTP Server IPv6 address of 2001:0db8::/32 to the
DHCPv6 pool named P2:
awplus#
awplus(config)#
awplus(config-dhcp6)#
The following example removes an SNTP Server IPv6 address of 2001:0db8::/32 to
the DHCPv6 pool named P2:
awplus#
awplus(config)#
awplus(config-dhcp6)#
Related dns-server (DHCPv6)
Commands
domain-name (DHCPv6)
option (DHCPv6)
show ipv6 dhcp pool
C613-50170-01 Rev B
Parameter
<ipv6-address>
configure terminal
ipv6 dhcp pool P2
configure terminal
ipv6 dhcp pool P2
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Specify an SNTP Server IPv6 address, in hexadecimal notation
in the format X:X::X:X.
sntp-address 2001:0db8::/32
no sntp-address 2001:0db8::/32
2542