Accessing The Servo Amplifier By The Mr Configurator - Mitsubishi Electric GT1685 Connection Manual

23.6.9 Accessing the servo amplifier
by the MR Configurator
Make the FA transparent settings with the of MT
Developer.
For details, refer to the following:
23.6.7 Accessing by the MT Developer
23.6.10 Accessing the servo amplifier
by the MR Configurator2
Make the FA transparent settings with the of MT Works2.
For details, refer to the following:
23.6.8 Accessing by the MT Works2
23.6.11 Accessing the inverter by the
FR Configurator
This section explains the setting method of the FA
transparent function of FR Configurator with an example of
connecting to FREQROL A700/F700 series.
1.
Click [Settings] [Communication Settings...] in FR
Configurator.
2.
Check-mark either of the following in [Communication
Port].
When connecting the GOT and PC with serial
Mark the [RS-232C] checkbox.
When connecting the GOT and PC with USB
Mark the [USB] checkbox.
3.
Click the [GOT Transparent Communication].
4.
Click the [OK].
5.
Click [OFFLINE] to make it [ONLINE].
6.
Click the [System Read], then check if GOT has been
connected to FREQROL A700/F700 series normally.
23. FA TRANSPARENT FUNCTION
23.6 Personal Computer Side Setting
17
18
19
20
21
22
23
23 - 73