Upgrade Ac - Siemens scalance WLC711 Reference Manual

Examples
The following example performs a traceroute to a specified IP Address:
WLC.siemens.com
traceroute to 68.142.226.40 (68.142.226.40), 30 hops max, 38 byte packets
1 192.168.1.1 (192.168.1.1)
2 67.69.27.57 (67.69.27.57)
3 64.230.194.178 (64.230.194.178)
4 64.230.233.81 (64.230.233.81)
5 64.230.222.21 (64.230.222.21)
6 206.108.107.230 (206.108.107.230)
7 209.58.25.69 (209.58.25.69)
8 216.6.57.33 (216.6.57.33)
9 216.6.57.42 (216.6.57.42)
10 63.243.149.110 (63.243.149.110)
11 216.115.96.189 (216.115.96.189)
(216.115.96.173)
12 206.190.33.95 (206.190.33.95)
36.402 ms 206.190.33.89 (206.190.33.89)
13 68.142.226.40 (68.142.226.40)
The following example performs a traceroute, specifying the source interface by number:
WLC.siemens.com
traceroute to 192.168.3.12 (192.168.3.12) from 10.1.0.1, 30 hops max, 38 byte
pa
1 ac_esa_port_0 (10.1.0.1)

upgrade ac

Use the
upgrade ac
accessible from the root context of the CLI.
upgrade ac filename | number | ftp | bckto local | bckto ftp | bckto flash
filename
Parameters
filename
number
ftp
bckto local
bckto ftp
bckto flash filename
SCALANCE WLC711 CLI Reference Guide
# traceroute 68.142.226.40
0.801 ms
1.898 ms
9.666 ms
10.266 ms
10.458 ms
28.928 ms
36.011 ms
40.339 ms 216.115.96.193 (216.115.96.193)
36.994 ms 206.190.33.93 (206.190.33.93)
36.595 ms
# traceroute source-interface number 2 192.168.3.12
ckets
3001.190 ms !H
command to upgrade the controller software. The
Specifies the file name of the new image.
Specifies an ordinal image number returned by the show upgrade
command
Specifies ftp server on which the upgrade image is uploaded. This ftp server
is set by upgrade_image_src command.
Backs up the existing operating system of the controller to the local drive.
The bckto local command is supported only on the platforms that
support local storage.
Backs up the existing operating system of the controller to the remote FTP
server. The FTP server is set by the upgrade_backup_dest command.
Backs up the existing operating system of the controller to the external
flash.
0.749 ms 0.729 ms
1.909 ms 1.894 ms
9.660 ms 14.352 ms
10.382 ms 9.307 ms
10.114 ms 10.300 ms
10.169 ms 9.392 ms
9.367 ms 10.942 ms
29.757 ms 30.315 ms
35.677 ms 34.488 ms
38.094 ms 33.761 ms
34.285 ms 216.115.96.173
32.584 ms
35.023 ms 35.818 ms
3000.825 ms !H
upgrade ac
root Commands
upgrade ac
11.032 ms
10.494 ms
35.160 ms
34.594 ms
3000.581 ms !H
command is
77