Siemens scalance WLC711 Reference Manual page 400
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
name new-name
Parameters
new-name
Usage
You must enter the
change to take affect. The CLI prompt does not change until you exit and re-enter the site:<named-
site> context.
Example
The following example:
•
Renames the site site1 to site9
•
Applies the change
•
Displays the site9 configuration
•
Exits site:<named-site> context
•
Re-enters the site:<named-site> context as site9
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Name: site9
...
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Name: site9
...
WLC.siemens.com
nasid
Use the
command to configure an NAS identifier for this site. The
nasid
from the site:<named-site> context.
nasid string | vnsname
Parameters
string
vnsname
SCALANCE WLC711 CLI Reference Guide
Specifies the new name for this <named-site>.
command before exiting the site:<named-site> context for the site name
apply
:site# site1
:site:site1# name site9
:site:site1# apply
:site:site1# show
:site:site1# exit
:site# site9
:site:site9#
:site:site9# show
:site:site9#
Specifies an NAS identifier for this <named-site>.
Specifies that the VNS name is used as the NAS identifier for this <named-site>.
site Commands
nasid
command is accessible
nasid
400
Advertisement
Table of Contents
