Siemens scalance WLC711 Reference Manual page 45

Examples
WLC.siemens.com
User: admin
show ap
Use the command to show the configuration information of Wireless APs connected to the
show ap
Wireless Appliance.
show ap access | registration | version | load-groups | defaults | config |
standard | 11n | dualband | 4102 | ap37xx | ap38xx | ap3801 | ap_serial | clients
| static_config | config | radio1 | radio2 | version | professional_antenna
Parameters
access
registration
version
load-groups
defaults
config
standard
11n
dualband
ap38xx
ap3801
ap_serial
clients
static_config
config
radio1
radio2
version
professional_antenna Displays the professional_antenna settings.
Examples
Example code is not currently available.
show ap_certificate
Use the
show ap_certificate
SCALANCE WLC711 CLI Reference Guide
# show active-user
Displays the status of the Wireless APs.
Displays the registration information.
Displays the software version installed on Wireless APs.
Displays the configured load groups.
Displays the Dynamic Radio Frequency management settings.
Displays the configured values of the Wireless AP.
Displays the configured values of standard AP (AP2610/AP2620).
Displays the configured values of the 802.11n Wireless APs (AP3610/AP3620).
Displays the configured values of dualband.
Displays the configured values of the 38xx access point.
Displays the configured values of the 3801 access point.
Specifies the serial number of a specific Wireless AP.
Displays the clients connected to the Wireless AP.
Displays the static configuration values.
Displays the configured values for the Wireless AP.
Displays the Wireless AP's radio 1 settings.
Displays the Wireless AP's radio 2 settings.
Displays the software version and hardware type of the Wireless AP.
command to displays the Wireless AP's current certificate credentials.
root Commands
show ap
45