Siemens scalance WLC711 Reference Manual page 299
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Examples
The following example enables the Chargeable-User-Identity attribute in Access-Request message:
WLC.siemens.com
interim
Use the
command to configure the RADIUS accounting server interim accounting interval.
interim
The
command is accessible from the wlans:<WLAN-service-name>:auth context of the CLI.
interim
interim interim-interval-value
Parameters
interim-interval-value
Usage
The
command is not available when the authentication mode is guestportal. When the
interim
authentication mode is disabled, MAC must be enabled for this command to be available. For
authentication
mode
mac
on page 299.
Example
The following example sets the interim value to 40 minutes:
WLC.siemens.com
mac
Use the
command to enable or disable MAC based authentication. The
mac
from the wlan:<WLAN-service-name>:auth context of the CLI.
mac enable | disable
Parameters
enable | disable
Usage
The
command is not available in the guest splash and guest portal authentication modes. For more
mac
information, see
mode
Example
The following example enables MAC authentication for the test WLANS:
WLC.siemens.com
WLC.siemens.com
MAC based authorization: enable
SCALANCE WLC711 CLI Reference Guide
:wlans:Lab184-AAA:auth# include-cui-type enable
Specify an integer value in minutes for the interim interval. The default
value is 30 minutes.
command information, see
:wlans:test:auth# interim 40
Specifies to enable or disable MAC based authentication
on page 302.
:wlans:test:auth# mac enable
:wlans:test:auth# show mac
mode
on page 302. For
mac
wlans Commands
interim
command information, see
command is accessible
mac
299
Advertisement
Table of Contents
