Siemens scalance WLC711 Reference Manual page 123

domain
Use the command to identify a group of APs that cooperate in managing RF channels and
domain
transmission power levels. The
domain domain_name
Parameters
domain_name
Example
The following example assigns the name test to the group of APs that cooperate in managing RF
channels and transmission power levels:
WLC.siemens.com
dtim
Use the command to set the Delivery Traffic Indication Message (DTIM) period. The
dtim
command is accessible from all radio contexts of the CLI.
dtim value
Parameters
value
Example
The following example sets the Delivery Traffic Indication Message period to 2 beacons:
WLC.siemens.com
force-disassociate
Use the
force-disassociate
force-disassociate
3801, and ap <serial> radio contexts for ap37xx and ap38xx APs when probe-suppression is enabled.
force-disassociate enable | disable
Parameters
disable | enable
SCALANCE WLC711 CLI Reference Guide
command is accessible from all radio contexts of the CLI.
domain
Specifies the group name of APs that cooperate in managing RF channels.
The maximum length of the domain string is 16 characters.
:ap:defaults:11n:radio2# domain test
Specifies the DTIM period in beacon intervals. The range for the dtim value is from 1
to 255 beacon intervals.
:ap:defaults:11n:radio2# dtim 2
command to enable or disable force disassociate on an AP radio. The
command is accessible from ap:defaults:37xx, ap:defaults:38xx, ap:defaults:
Enables or disables force disassociate for this radio context.
ap Commands
domain
dtim
123