Chapter 16: Traffic_Capture Commands; File_Name - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
16
traffic_capture Commands
file_name
size
interface
delete
list
start
stop
show
show interfaces
The
traffic_capture
commands to manage the TCPDump. The
context of the CLI.
All CLI commands cache changes. For this reason, sometimes when you make a change in a particular
context, the change may not be visible immediately. If this happens, you must exit and re-enter the
context in order to ensure that the database is synchronized with the latest change.
The following commands are available in the traffic_capture context:
•
file_name
on page 227
•
size
on page 228
•
interface
on page 228
•
delete
on page 229
•
list
on page 229
•
start
on page 230
•
stop
on page 230
•
show
on page 231
•
show interfaces
file_name
Use the
file_name
name to the TCPDump, the CLI gives a default name mgmt_traffic_dump.cap. The CLI enforces .cap file
extension to the TCPDump file. The
context of the CLI.
file_name fileName
SCALANCE WLC711 CLI Reference Guide
command moves you to the traffic_capture context, which contains the
traffic_capture
on page 231
command to specify a file name for the TCPDump. If you do not assign any file
file_name
command is accessible from the root
command is accessible from the traffic_capture
227
Advertisement
Table of Contents
