Siemens scalance WLC711 Reference Manual page 260

auth-timeout 1-360
Parameters
1-360
Examples
The following example sets the RADIUS authentication timeout to 10 seconds for the RADIUS server
named RAD1:
WLC.siemens.com
fast-failover
Use the
fast-failover
sending of interim account records (to the RADIUS server) when a failover occurs and the session
home moves to the availability partner.
After you run the
fast-failover
fast-failover (enable | disable)
Parameters
Enables the sending of interim account records to RADIUS for fast failover.
enable
Disables the sending of interim account records to RADIUS for fast failover.
disable
Usage
This command is available only when this controller has been enabled for fast-failover (see the
wlans:<WLAN-service-name>:auth RADIUS server configuration context
Examples
This example disables fast failover:
WLC.siemens.com
WLC.siemens.com
interim
Use the command to set the RADIUS interim accounting interval. The
interim
accessible from the vnsmode:radius:<named_RADIUS_server> context of the CLI.
interim 0-360
Parameters
0-360
SCALANCE WLC711 CLI Reference Guide
Specifies the RADIUS authentication timeout in seconds.
:vnsmode:radius:RAD1# auth-timeout 10
command in the vnsmode:<named-VNS> context to enable or disable the
command, run the
:vnsmode:VNS1# fast-failover disable
:vnsmode:VNS1# apply
Specifies the RADIUS interim accounting interval in seconds.
VNS Commands (vnsmode)
command to implement the changes.
apply
page 298
interim
fast-failover
command.
command is
260