Siemens scalance WLC711 Reference Manual page 333

11k-beacon-rep
Use the
11k-beacon-rep
appliances. The
11k-beacon-rep
context of the CLI.
Note
The
11k-beacon-rep
11k-beacon-rep enable | disable
Parameters
enable | disable
Example
The following example enables 802.11k beacon reports on the WLAN service:
WLC.siemens.com
11k-quiet-ie
Use the
11k-quiet-ie
appliances. The
11k-quiet-ie
context of the CLI.
Note
The
11k-quiet-ie
11k-quiet-ie enable | disable
Parameters
enable | disable
Example
The following example enables 802.11k Quiet IE on the WLAN service:
WLC.siemens.com
11k-support
Use the
11k-support
appliances. The
11k-support
of the CLI.
11k-support enable | disable
Parameters
enable | disable
SCALANCE WLC711 CLI Reference Guide
command to enable and disable 802.11k beacon reports on AP 37xx and 38xx
command is accessible from the wlan:<WLAN-service-name>:rf
command is only available after the
Enables or disables 802.11k beacon reports on AP 37xx and 38xx appliances.
:wlans:AZ-723-WLAN1:rf# 11k-beacon-rep enable
command to enable and disable 802.11k Quiet IE on AP 37xx and 38xx
command is accessible from the wlan:<WLAN-service-name>:rf
command is only available after the
Enables or disables 802.11k Quiet IE on AP 37xx and 38xx appliances.
:wlans:AZ-723-WLAN1:rf# 11k-quiet-ie enable
command to enable and disable 802.11k support on AP 37xx and 38xx
command is accessible from the wlan:<WLAN-service-name>:rf context
Enables or disables 802.11k support on AP 37xx and 38xx appliances.
command is enabled.
11k-support
command is enabled.
11k-support
wlans Commands
11k-beacon-rep
333