Siemens scalance WLC711 Reference Manual page 240

Example
The following example sets the maximum voice bandwidth for new streams to 60% of total bandwidth:
WLC.siemens.com
max-voice-reassoc
Use the
max-voice-reassoc
when a client with an active voice stream roams to a new AP and requests admission for the voice
stream.
After you run the
max-voice-reassoc
max-voice-reassoc 0-100
Parameters
0-100
Examples
The following example sets the maximum voice bandwidth for roaming streams to 80%:
WLC.siemens.com
policy-invalid-action
Use the
policy-invalid-action
policy-invalid-action
policy-invalid-action default | allow | deny
Parameters
default
allow
deny
Examples
The following example sets policy-invalid-action behavior to deny:
WLC.siemens.com
tg-selection
Use the
tg-selection
command is accessible from the vnsmode:adminctr context of the CLI.
selection
SCALANCE WLC711 CLI Reference Guide
:vnsmode:adminctr# max-voice-assoc 60
command to set the maximum allowed overall bandwidth on the new AP
command, run the
Specifies the maximum allowable bandwidth as a percentage of total bandwidth.
:vnsmode:adminctr# max-voice-reassoc 80
command to configure the global invalid policy action. The
command is accessible from the vnsmode:adminctr context of the CLI.
Sets the global invalid policy action to the default.
Sets the global invalid policy action to allow an invalid policy.
Sets the global invalid policy action to deny an invalid policy.
:vnsmode:adminctr# policy-invalid-action deny
command to configure the topology group selection algorithm. The
VNS Commands (vnsmode)
max-voice-reassoc
command to implement the changes.
apply
tg-
240