Siemens scalance WLC711 Reference Manual page 371

Example
The following example changes the name of the topology to bridged_ac2:
WLC.siemens.com
show
Use the command to display information about a topology. The
show
the topology:<named-topology> context of the CLI for Admin, b@ac, b@ap, physical, and routed
topologies.
show
Parameters
None
Examples
The following examples shows configuration information for the Admin topology:
WLC.siemens.com
Name: Admin
The following example shows configuration information for a b@ac topology:
WLC.siemens.com
Synchronize: disable
Name: BridgedAC2
Layer 3 presence: disable
The following example shows configuration information for a b@ap topology:
WLC.siemens.com
Synchronize: enable
Name: BridgedAP2
The following example shows configuration information for a physical topology:
WLC.siemens.com
Name: esa0
3rd party: disable
The following example shows configuration information for a routed topology:
WLC.siemens.com
Topology mode: routed
Synchronize: enable
Name: r1
SCALANCE WLC711 CLI Reference Guide
:topology:bridged_ac1# name bridged_ac2
:topology:Admin# show
:topology:BridgedAC2# show
:topology:BridgedAP2# show
:topology:esa0# show
:topology:r1# show
topology Commands
command is available from
show
show
371