Named-Site - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
<named-site>
The
<named-site>
to the site:<named-site> context.
The site:<named-site> context provides commands for the configuration of the <named-site>. A
<named-site> must first be created using the
becomes available as a command, allowing access to the site:<named-site> context for that site. For
example, to enter the <named-site> context for the site named site1, use the command site1 from the
site context, created using the
After you have completed configuration changes for a <named-site>, you must run the
command before exiting the site:<named-site> context to implement the changes.
The following commands are available in the site:<named-site> context.
•
assign-ap
on page 395
•
assign-policy
on page 395
•
assign-wlan
on page 396
•
band-preference
•
config
on page 397
•
custom
on page 398
•
dns
on page 398
•
local-radius
on page 398
•
move
on page 399
•
name
on page 399
•
nasid
on page 400
•
nasip
on page 401
•
password
on page 401
•
ping
on page 402
•
protocol
on page 402
•
radio1-load
on page 403
•
radio2-load
on page 403
•
radio1-load
on page 403
•
radio1-loadcontrol
•
radio2-loadcontrol
•
radio1-strictlimit
•
radio2-strictlimit
•
remove
on page 405
•
replace-station-id
•
secure-tunnel
on page 406
•
secure-tunnel-ap
•
secure-tunnel-control
•
secure-tunnel-lifetime
•
show
on page 408
SCALANCE WLC711 CLI Reference Guide
command, where <named-site> refers to the name of a given site, provides access
create
create <site-name>
on page 397
on page 403
on page 404
on page 404
on page 405
on page 405
on page 406
on page 407
on page 407
command in the site context. Once created it
command.
site Commands
<named-site>
apply
394
Advertisement
Table of Contents
