Chapter 11: Schedule_Backup Commands - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
11
schedule_backup Commands
destination
dir
freq
password
protocol
server
starttime
type
user
This section describes commands for scheduling the backup of the following information:
•
Software configurations
•
CDRs
•
Logs
•
Audit Report
This section describes commands which manage scheduling options for the backup of data locally or to
an FTP or SCP address. The destination command setting specifies the destination where the export file
is saved to. These commands are located in the schedule_backup context of the CLI.
All CLI commands cache changes. For this reason, sometimes when you make a change in a particular
context, the change may not be visible immediately. If this happens, you must exit and re-enter the
context in order to ensure that the database is synchronized with the latest change.
After running the
changes.
The following commands are available in the schedule_backup context:
•
destination
on page 204
•
dir
on page 204
•
freq
on page 204
•
password
on page 205
•
protocol
on page 206
•
server
on page 206
•
starttime
on page 206
•
type
on page 207
•
user
on page 207
SCALANCE WLC711 CLI Reference Guide
commands, you must run the
schedule_backup
command to implement the
apply
203
Advertisement
Table of Contents
