Siemens scalance WLC711 Reference Manual page 368
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Example
The following example sets the netmask for the bap topology to 24 (equivalent to netmask
255.255.255.0):
WLC.siemens.com
nexthop
Use the
command to set the IP address of the next hop router through which traffic will be
nexthop
directed. The
nexthop
CLI for routed topologies.
After you run the
nexthop
nexthop A.B.C.D | none
Parameters
A.B.C.D
none
Example
The following example sets the IP address of the next hop router (169.232.75.1):
WLC.siemens.com
ospf-advert
Use the
ospf-advert
command is available from the topology:<named-topology>:l3 context of the CLI for
ospf-advert
routed topologies.
After you run the
ospf-advert
ospf-advert enable | disable
Parameters
enable
disable
Example
The following example enables OSPF advertisements:
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
:topology:bap:l3# netmask 24
command is available from the topology:<named-topology>:l3 context of the
command, run the
apply
Specifies the IP address of the next hop router.
Clears the IP address of the next hop router.
:topology:r1:l3:# nexthop 169.232.75.1
command to enable or disable OSPF advertisements on the topology. The
command, run the
Enables OSPF advertisements.
Disables OSPF advertisements.
:topology:r1:l3:# ospf-advert enable
command to implement the changes.
command to implement the changes.
apply
topology Commands
nexthop
368
Advertisement
Table of Contents
