Siemens scalance WLC711 Reference Manual page 131

n_aggr_mpdu_max_subframes
Use the
n_aggr_mpdu_max_subframes
may be contained in an aggregate MPDU. The
from the ap:defaults:11n, ap37xx, ap38xx, ap3801, and ap:<serial> radio and ap38xx and <serial>
contexts of the CLI for those APs that support it.
n_aggr_mpdu_max_subframes 2-64
Parameters
2-64
Example
The following example sets the maximum number of subframes to 50:
WLC.siemens.com
n_aggr_msdu
Use the
n_aggr_msdu
disable the use of aggregate MSDUs. The
ap37xx, ap38xx, ap3801, and ap:<serial> radio and ap38xx and <serial> contexts of the CLI for those
APs that support it.
n_aggr_msdu
no n_aggr_msdu
Parameters
None
Example
The following example disables the aggregate MSDU:
WLC.siemens.com
n_chlwidth
Use the
n_chlwidth
Auto. This command is only available when the radio mode includes 11n or 11ac. The
command is accessible from the ap:defaults:11n, ap37xx, ap38xx, ap3801, and ap:<serial> radio and
ap38xx and <serial> contexts of the CLI for those APs that support it.
n_chlwidth ( 20 | 40 | 80 | auto)
SCALANCE WLC711 CLI Reference Guide
command to specify the maximum number of subframes that
n_aggr_mpdu_max_subframes
The maximum number of subframes allowed in an aggregate MPDU. The range of
values is from 2 to 64.
:ap:defaults:11n:radio2# n_aggr_mpdu_max_subframes 50
command to enable the use of aggregate MSDUs. Use the
n_aggr_msdu
:ap:defaults:11n:radio2# no n_aggr_msdu
command to specify the 11n or 11ac channel width — 20 MHz, 40 MHz, 80 MHz, or
n_aggr_mpdu_max_subframes
command is accessible
no
command is accessible from the ap:defaults:11n,
ap Commands
command to
n_chlwidth
131