Chapter 19: Wlans Commands; Clients - Siemens scalance WLC711 Reference Manual

19
wlans Commands

clients

create
delete
remote-ssid
show
<WLAN-service-name>
This section describes commands used to define and configure WLAN services for the network. These
commands are located in the wlans context of the CLI. Execute the
enter wlans context.
All CLI commands cache changes. For this reason, sometimes when you make a change in a particular
context, the change may not be visible immediately. If this happens, you must exit and re-enter the
context in order to ensure that the database is synchronized with the latest change.
The following commands are available in the wlans context:
•
clients on page 275 — See
•
create on page 279
•
delete on page 280
•
remote-ssid on page 280
•
show on page 281
•
<WLAN-service-name>
context.
clients
The clients context provides commands which are used to configure guest access features on the
Wireless Appliance. Switch to the clients context from the wlans context to access the following
commands on the Wireless Appliance.
A guest portal WLAN service must be created on this controller before the clients context command
and the context's associated commands are available. For more on creating a guest portal WLAN
service, see mode
The following commands are available in the wlan:clients context.
•
client on page 276
•
descr on page 276
•
enable on page 277
•
endofday on page 277
•
export_clients
SCALANCE WLC711 CLI Reference Guide
clients on page 275 for commands in the wlan:clients context.
on page 281 — See for commands in the wlan:<WLAN-service-name>
on page 302.
on page 278
command at the root level to
wlans
275