Siemens scalance WLC711 Reference Manual page 89

wlans-list
Use the
wlans-list
command to remove radio assignment from specific WLAN Services. The
no
accessible from the ap:defaults context of the CLI.
After you run the
wlans-list
assignments.
wlans-list wlans-name | radio1 | radio2 no wlans-list wlans-name | radio1 |
radio2
Parameters
wlans-name
radio1
radio2
Examples
The following example assigns Radio 1 to CNL-209 WLANS:
WLC.siemens.com
wlans-foreign-ap
Use the
wlans-foreign-ap
foreign APs. The
wlans-list
wlans-foreign-ap enable | disable
Parameters
enable
disable
Examples
The following example enables the application of default WLAN assignments to foreign APs:
WLC.siemens.com
dualband
Use the
dualband
The dualband command is available from the ap:defaults context of the CLI.
The following commands are available in the ap:defaults:dualband context:
•
balanced-power
•
bcast_disassoc
•
client_session on page 108
SCALANCE WLC711 CLI Reference Guide
command to assign Radio 1 and Radio 2 of APs to specific WLAN Services. Use the
command, run the
The name of the WLAN service.
5GHz radio.
2.4GHz radio.
:ap:defaults:assign# wlans-list CNL-209 radio1
command to enable the application of default WLAN assignments to
command is accessible from the ap:defaults: context of the CLI.
Specifies that default WLAN assignments are applied to foreign APs.
Specifies that default WLAN assignments are not applied to foreign APs.
:ap:defaults:# wlan-foreign-ap enable
command to configure Wireless AP default configuration for Wireless Outdoor APs.
on page 108
command to implement the changes in radio
apply
ap Commands
wlans-list
command is
wlans-list
89