Siemens scalance WLC711 Reference Manual page 133

Example
The following example sets the extension channel threshold value to 60 per cent:
WLC.siemens.com
n_pmode
Use the command to enable the protection on the primary channel. The
n_pmode
accessible from the ap:defaults:11n, ap37xx, ap38xx, ap3801, and ap:<serial> radio and ap38xx and
<serial> contexts of the CLI for those APs that support it.
n_pmode none | always | auto
Parameters
none
always
auto
Example
The following example enables the protection mode with the always option:
WLC.siemens.com
n_ptype
Use the command to specify the 40 MHz protection type — whether CTS, RTS or none. The
n_ptype
command is accessible from the ap:defaults:11n, ap37xx, ap38xx, ap3801, and ap:<serial> radio
n_ptype
and ap38xx and <serial> contexts of the CLI for those APs that support it.
n_ptype { cts only | rts cts }
Parameters
cts only
rts cts
Example
The following example sets the clear to send (CTS) protection type:
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
:ap:defaults:11n:radio2# n_pbthreshold 60
Specifies that n_pmode is not enabled.
Specifies that n_pmode is always enabled.
Specifies that the n_pmode is auto selected.
:ap:defaults:11n:radio2# n_pmode always
Specifies Clear to Send (CTS) protection type.
Specifies Receive to Send (RTS) / Clear to Send (CTS) protection type.
:ap:defaults:11n:radio2# n_ptype cts only
ap Commands
n_pmode
command is
n_pmode
133