Examples
The following command specifies a password for the user on the server:
WLC.siemens.com
protocol
Use the
protocol
destination server.
protocol [ftp|scp]
Parameters
ftp
scp
Examples
The following example sets the protocol to SCP:
WLC.siemens.com
server
Use the
command to specify the IP address of the destination server for backup data.
server
server IP Address
Parameters
IP Address
Examples
The following example sets the IP address of the server receiving backup data:
WLC.siemens.com
starttime
Use the
starttime
task time must be set to daily, weekly, or monthly before the start time can be specified. For more
information, see
freq
starttime HH:mm
SCALANCE WLC711 CLI Reference Guide
:schedule_backup# password rYm239sJ
command to specify the appropriate protocol to use when communicating with the
Specifies the FTP protocol
Specifies the SCP protocol
:schedule_backup# protocol scp
Specifies the IP address of the FTP or SCP server. The IP address can be either IPv4
(A.B.C.D) or IPv6 (A:B:C:D:E:F:G:H) format.
:schedule_backup# server 192.168.1.17
command to specify the time of day to start a scheduled backup. The scheduled
on page 204.
schedule_backup Commands
protocol
206