Siemens scalance WLC711 Reference Manual page 335

Example
The following example displays the current RF settings for the WLAN service named "test":
WLC.siemens.com
Process client IE requests: disable
Enable 11h support: disable
Apply power reduction to 11h clients: disable
Suppress SSID: disable
Energy save mode: disable
ssid-suppress
Use the
ssid-suppress
AP. The
ssid-suppress
the CLI.
After you run the
ssid-suppress
ssid-suppress enable | disable
Parameters
enable | disable
Example
The following example prevents SSID broadcasts:
WLC.siemens.com
WLC.siemens.com
show
Use the wlan:<WLAN-service-name>:
individual WLAN service. The
context of the CLI.
Examples
The following example displays the current WLAN service settings for the WLAN service named "test":
WLC.siemens.com
Service type: std
Name: test
Synchronize: disable
Enable status: enable
Wireless AP Services:
Wireless AP: 04099202012xxxxx
Wireless AP: 04099202012xxxxx
Wireless AP: 05000092030xxxxx
SSID: _ssidtest
pre-authentication timeout(minutes): 5
SCALANCE WLC711 CLI Reference Guide
:wlans:test:rf# show
command to allow or prevent the SSID from being broadcast by the Wireless
command is accessible from the wlan:<WLAN-service-name>:rf context of
command, run the
Enables or disables the suppression of broadcast of the SSID.
:wlans:CNL6-AAA# ssid-suppress enable
:wlans:CNL6-AAA# apply
command to display the current settings of the specified
show
command is accessible from the wlan:<WLAN-service-name>
show
:wlans:test# show
command to implement the changes.
apply
wlans Commands
ssid-suppress
335