Parameters
default
control
Examples
The following example specifies default upgrade:
WLC.siemens.com
The following example specifies controlled upgrade:
WLC.siemens.com
registration
The
registration
configure registration options for connected Wireless APs.
The
registration
The following commands are available in the ap:registration context:
•
cluster-encryption
•
cluster-shared-secret
•
dinterval
on page 102
•
dretry
on page 102
•
passwd
on page 103
•
security
on page 103
•
sshpasswd
on page 104
cluster-encryption
Use the
cluster-encryption
secret. The
cluster-encryption
cluster-encryption enable | disable
Parameters
enable | disable
SCALANCE WLC711 CLI Reference Guide
Specifies default upgrade. As part of the default upgrade process, when the
Wireless AP registers with the controller, the AP's firmware version is verified. If it
does not match with the value as defined for the default image, the AP is requested
to upgrade to the default image.
Specifies controlled upgrade. The controlled upgrade allows you to individually
select and control the state of a Wireless AP image upgrade. For example, you can
specify which Wireless AP to upgrade, the upgrade schedule, and how to upgrade.
:ap:maintenance# upgrd default
:ap:maintenance# upgrd control
command refers to context ap:registration, which describes commands to
command is accessible from the ap context of the CLI.
on page 101
on page 102
command to enable or disable the encryption for the cluster shared
command is accessible from the ap:registration context of the CLI.
Enables or disables the encryption for the cluster shared secret.
ap Commands
registration
101