Siemens scalance WLC711 Reference Manual page 103

Parameters
number
Examples
The following example sets the number of registration retry attempts to 4:
WLC.siemens.com
passwd
Use the command to assign a password for telnet accessible Wireless APs. The
passwd
command is accessible from the ap:registration context of the CLI.
passwd telnet password
Parameters
telnet password
Examples
The following example assigns password 'thisistelnetpassword':
WLC.siemens.com
security
Use the
security
Appliance. Use the no form of the command to allow all Wireless APs to connect to it. The
command is accessible from the ap:registration context of the CLI.
Wireless APs without connection approval are put into a pending state, and an administrator has to
manually approve those connections.
security no security
Parameters
None
Examples
The following example allows only approved Wireless APs to connect to the Wireless Appliance:
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
Specifies the number of retry attempts for the Wireless AP registration process.
Valid entries are integers from 1 - 255.
:ap:registration# dretry 4
Specifies the telnet password. The telnet password must be between 5 and 30
alphanumeric characters. Do not confuse the telnet password with the ssh
password.
:ap:registration# passwd thisistelnetpassword
command to allow only approved Wireless APs to connect to the Wireless
:ap:registration# security
ap Commands
passwd
passwd
security
103