Siemens scalance WLC711 Reference Manual page 310
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Parameters
enable | disable
Usage
The
vsa-ingress
authentication mode is disabled, MAC must be enabled for this command to be available. For more
information, see
mode
Example
The following example enables the inclusion of ingress rate control information in messages to the
RADIUS server:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Ingress as VSA attribute: enable
vsa-policy
Use the
vsa-policy
command is accessible from the wlan:<WLAN-service-name>:auth context of the CLI.
vsa-policy
After you run the
vsa-policy
vsa-policy enable | disable
Parameters
enable | disable
Usage
The
command is not available when the authentication mode is guestportal. When the
vsa-policy
authentication mode is disabled, MAC must be enabled for this command to be available. For more
information, see
mode
Example
The following example enables the inclusion of policy information in the message to the RADIUS server:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Policy as VSA attribute: enable
SCALANCE WLC711 CLI Reference Guide
Specifies to enable or disable the inclusion of ingress rate control
information in messages to the RADIUS server.
command is not available when the authentication mode is guestportal. When the
on page 302.
:wlans:test:auth# vsa-ingress enable
:wlans:test:auth# apply
:wlans:test:auth# show vsa-ingress
command to include policy information in the message to the RADIUS server. The
command, run the
Specifies to enable or disable the inclusion of policy information in
messages to the RADIUS server.
on page 302.
:wlans:test:auth# vsa-policy enable
:wlans:test:auth# apply
:wlans:test:auth# show vsa-policy
command to implement the changes.
apply
wlans Commands
vsa-policy
310
Advertisement
Table of Contents
