Siemens scalance WLC711 Reference Manual page 236

Parameters
on
off
wlan
Examples
The following example enables filtering on the wlan:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Global Egress Filtering: wlan
flex-client-access
Use the
flex-client-access
medium. FCA can be adjusted in multiple steps between packet fairness and airtime fairness using this
command. This command is available in the vnsmode:adminctr context.
flex-client-access 100%-packet | mostly-packet | mixed | mostly-airtime | 100%-
airtime
Parameters
100%-packet
mostly-packet
mixed
mostly-airtime
100%-airtime
Examples
The following example sets the FCA to 100% packet access:
WLC.siemens.com
hybrid-policy
Use the
hybrid-policy
use both a VLAN ID in the tunnel attributes and a filter ID to select policy for a station. This command is
available in the vnsmode:adminctr context.
hybrid-policy policy | vlan | combined
SCALANCE WLC711 CLI Reference Guide
Enables global egress filtering. When egress filtering is enabled globally, it overrides
individual wlan settings.
Disables global egress filtering. When egress filtering is disabled globally, it overrides
individual wlan settings.
Enables egress filtering globally on the wlan. When this is enabled, individual wlan filtering
settings override global settings.
:vnsmode:adminctr# egress-filtering wlan
:vnsmode:adminctr# apply
:vnsmode:adminctr# show
command to configure flexible client access (FCA) to the wireless
Specifies 100% packet access to the wireless medium
Specifies mostly packet access to the wireless medium
Specifies mixed access to the wireless medium
Specifies mostly airtime access to the wireless medium
Specifies 100% airtime access to the wireless medium
:vnsmode:adminctr# flex-client-access 100%-packet
command to configure RFC 3580 options. This mode enables the controller to
VNS Commands (vnsmode)
flex-client-access
236