Siemens scalance WLC711 Reference Manual page 369

ospf-cost
Use the
ospf-cost
from the topology:<named-topology>:l3 context of the CLI for routed topologies.
After you run the
ospf-cost
ospf-cost 1-50000
Parameters
1-50000
Examples
The following example sets the OSPF route cost value to 6000:
WLC.siemens.com
show
Use the command to display Layer 3 information. The
show
topology:<named-topology>:l3 context of the CLI for Admin, b@ac, physical, and routed topologies.
show
Parameters
None
Examples
The following example displays Layer 3 information for a physical topology:
WLC.siemens.com
Interface IP 10.109.0.1 255.255.255.0
AP Registration: enable
Allow management traffic: disable
Factory default certificate/key
MTU: 1500
The following example displays Layer 3 information for a b@ac topology:
WLC.siemens.com
Interface IP 0.0.0.0 0.0.0.0
AP Registration: disable
Allow management traffic: disable
Factory default certificate/key
Strict Subnet Adherence: enable
MTU: 1436
SCALANCE WLC711 CLI Reference Guide
command to set the OSPF route cost value. The
command, run the
Specifies the OSPF route cost value.
:topology:r1:l3:# ospf-cost 6000
:topology:esa0:l3# show
:topology:bridged_ac1:l3# show
ospf-cost
command to implement the changes.
apply
command is available from the
show
topology Commands
ospf-cost
command is available
369