Date; Ntp - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Example
The following example sets the system time to 12:01pm:
WLC.siemens.com
date
Use the
command to set the system date. The Network Time Protocol must be disabled before
date
this command can be used. For more information, see
date dd:mm:yyyy
Parameters
dd
mm
yyyy
Example
The following example sets the date to January 17, 2099:
WLC.siemens.com
ntp
Use the
command to use the Network Time Protocol (NTP). Use the no form of the command to
ntp
disable it. If you want to use the external NTP Server, configure the NTP Server's IP address by running
the
command. For more information, see
ntpip
ntp [2|3]
(no) ntp [1|2|3]
Parameters
2
3
Example
The following example specifies to use the internal NTP Server to synchronize the network time:
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
:time# clock 12:01
Specifies the day
Specifies the month
Specifies the year
# date 17:01:2099
Specifies to use the external NTP Server to synchronize the network time
Specifies to use the internal NTP Server to synchronize the network time
:time# ntp 3
ntp
on page 225.
ntpip
on page 226.
time Commands
date
225
Advertisement
Table of Contents
