Radius - Siemens scalance WLC711 Reference Manual

traffic-mirror-firstn
Use the
traffic-mirror-firstn
command is accessible from the vnsmode:netflow-mirror context of the CLI.
mirror-firstn
traffic-mirror-firstn packets
Parameters
packets
Example
The following example sets the MirrorN first N packets to 20 packets:
WLC.siemens.com
traffic-mirror-l2port
Use the
traffic-mirror-l2port
command is accessible from the vnsmode:netflow-mirror context of the CLI.
l2port
traffic-mirror-l2port (none | esa0 | esa1)
Parameters
none | esa0 | esa1
Example
The following example sets the mirror L2 port to esa0:
WLC.siemens.com

radius

Executing the
radius
following commands to manage RADIUS server configuration. After you create a radius server
configuration, you can further configure it by entering the vnsmode:radius:<server-name> context. See
<named_RADIUS_server>
The following commands are available in the vnsmode:radius context:
•
create on page 250
•
defer-acct-start
•
delay-client-msg
•
delete on page 251
•
include-service-type
•
polling-interval
•
polling-mechanism
SCALANCE WLC711 CLI Reference Guide
command to configure the MirrorN first N packets. The
Specifies the MirrorN first N packets from 1 - 31. The default is 15 packets.
:vnsmode:netflow-mirror# traffic-mirror-firstn 20
command to set the traffic mirror L2 port. The
Configures the L2 mirror port and the controller to none, esa0, or esa1.
:vnsmode:netflow-mirror# traffic-mirror-l2port esa0
command moves you into the vnsmode:radius context, which contains the
on page 256.
on page 250
on page 251
on page 252
on page 252
on page 252
VNS Commands (vnsmode)
traffic-mirror-firstn
traffic-
traffic-mirror-
249