Siemens scalance WLC711 Reference Manual page 408

Example
The following example enables a secure tunnel for 20 hours:
WLC.siemens.com
show
Use the command to display the <named-site> configuration information for the current
show
site:<named-site> context. The
Syntax
show
Parameters
None.
Example
The following example displays the site1 site configuration from within the site:<named-site> context:
WLC.siemens.com
WLC.siemens.com
Name: site1
Local Radius Authentication: enable
Band Preference: disable
Radio1 Load Control: disable
Radio2 Load Control: disable
DNS servers: 0.0.0.0
policy assignment: Unauth,Auth,SiteAuth
WLAN service assignment:
wlan_east both
No radius server has been selected
Priority Name
1 NPS_R2
Secure Tunnel: enable
Control Traffic Encryption(Controller): enable
Control Traffic Encryption(APs): enable
Replace Station ID: enable
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
:site:site1# secure-tunnel-lifetime 20
command is accessible from within the site:<named-site> context.
show
:site# site1
:site:site1# show
Role NAS IP
auth Use VNS IP address
:site:site1#
NAS ID Auth Type
Use VNS name MS-CHAP2
site Commands
show
408