Siemens scalance WLC711 Reference Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Wireless Access Point
  5. scalance WLC711
  6. Reference manual
Siemens scalance WLC711 Reference Manual

Siemens scalance WLC711 Reference Manual

Hide thumbs Also See for scalance WLC711:
1
2
Table Of Contents
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
Table of Contents

Advertisement

Quick Links

Download this manual See also: Maintenance Manual
SCALANCE WLC711 CLI
Reference Guide
Release V9.21.14
C79000-G8976-C261-07
Published July 2015

Advertisement

Table of Contents
loading

Related Manuals for Siemens scalance WLC711

Summary of Contents for Siemens scalance WLC711

  • Page 1 SCALANCE WLC711 CLI Reference Guide Release V9.21.14 C79000-G8976-C261-07 Published July 2015...
  • Page 2 Note the following: Warning Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 3: Table Of Contents

    35 flash......................................35 no flash....................................36 healthpoll....................................36 import.......................................36 key......................................37 loglevel....................................38 ping......................................39 radtest......................................39 radtest_mba..................................40 reset......................................41 restart......................................41 restore......................................42 secureconnection................................42 show......................................43 shutdown....................................75 tech_support..................................75 traceroute....................................76 upgrade ac..................................... 77 upgrade apup..................................78 upgrade_backup_dest..............................79 SCALANCE WLC711 CLI Reference Guide...
  • Page 4 200 agent..................................... 200 secmode....................................201 mdismethod..................................201 mmanagerip..................................202 Chapter 11: schedule_backup Commands................203 destination..................................204 dir......................................204 freq......................................204 password..................................... 205 protocol....................................206 server.....................................206 starttime....................................206 type......................................207 user......................................207 Chapter 12: schedule_upgrade Commands...............209 schld_upgrd..................................209 upgrade_backup................................210 SCALANCE WLC711 CLI Reference Guide...
  • Page 5 229 list......................................229 start......................................230 stop......................................230 show......................................231 show interfaces.................................. 231 Chapter 17: users Commands....................232 id.......................................232 pwd......................................233 Chapter 18: VNS Commands (vnsmode)................234 adminctr....................................234 create...................................... 241 das......................................242 default-role..................................243 delete.....................................246 nac......................................246 SCALANCE WLC711 CLI Reference Guide...
  • Page 6 383 Chapter 23: cos Commands....................384 create.....................................384 delete..................................... 385 show....................................... 385 <named-cos>..................................386 Chapter 24: site Commands....................392 create.....................................392 delete..................................... 393 show site....................................393 <named-site>..................................394 Chapter 25: RF Location Commands................. 409 location-engine................................409 default-height..................................410 auto-tracking..................................410 SCALANCE WLC711 CLI Reference Guide...
  • Page 7 Table of Contents default-env-mode................................411 floor-plan....................................411 on-demand...................................413 publish....................................413 show......................................414 Chapter 26: Publish Commands...................415 push......................................415 interval....................................416 unit......................................416 push-list....................................416 SCALANCE WLC711 CLI Reference Guide...

  • Page 8: Chapter 1: About This Guide

    How to Use This Guide Text Conventions The Command Line Interface (CLI) is used to configure the SCALANCE WLC711 and the SCALANCE W Controller Access Points. It is accessible directly on the controller's console port, or via Secure Shell (SSH) access on the ESA or Management ports.

  • Page 9: Text Conventions

    • Publish Commands on page 415 describes commands used in the publish context. Related Documentation SCALANCE WLC711 documentation is available at: www.siemens.com/automation/service&support Keyboard Shortcuts There are several keyboard shortcuts available to assist in navigating within the contexts of the CLI.
  • Page 10 [Key] names Key names are written with brackets, such as [Return] or [Esc]. If you must press two or more keys simultaneously, the key names are linked with a plus sign (+). Example: Press [Ctrl]+[Alt]+[Del] SCALANCE WLC711 CLI Reference Guide...

  • Page 11: Chapter 2: Introduction To The Cli

    Netmask - Management port's (Admin) subnet mask. • Gateway - Management port's (Admin) gateway. • Primary DNS - Address of the Primary DNS. • Secondary DNS - Address of the Secondary DNS. The Current Time Settings screen appears. SCALANCE WLC711 CLI Reference Guide...
  • Page 12 5 Enter the SNMP mode and press Enter. • 0 = SNMP disabled. • 1 = SNMPv1/v2c enabled. • 2 = SNMPv3 enabled. Entering 1 or 2 requires additional SNMP configuration. The Current Data Plane Settings screen appears. SCALANCE WLC711 CLI Reference Guide...

  • Page 13: Cli Structure

    The following diagram shows the root context. Many of the commands move to a context (ap, topology) and some are commands that perform a system function (export, login). This kind of structure applies at every context level. SCALANCE WLC711 CLI Reference Guide...

  • Page 14: Account Types

    Configure Controller L2 Ports settings lanset Set Ethernet link parameters Modify settings for AP location based service. login Configure login settings. loglevel Set a log level logout Logout mitigator Modify Mitigator settings to assist in SCALANCE WLC711 CLI Reference Guide...
  • Page 15 Set ftp parameters for full disk clone backup upgrade_image_src Set location of upgrade image, if remote upgrade is being performed users Change Controller user settings vnsmode Modify Controller VNS(Virtual Network Segment) settings Modify web settings wlans Configure WLAN Service settings SCALANCE WLC711 CLI Reference Guide...

  • Page 16: Chapter 3: Common Commands

    Parameters None Examples The following example disables the DNS server configuration. WLC.siemens.com .com:dns# no dns 192.1.1.3 WLC.siemens.com :dns# apply Use the command to return to the base context. Parameters None SCALANCE WLC711 CLI Reference Guide...

  • Page 17: Exit

    The following example displays the available commands in the ap:defaults context: WLC.siemens.com :ap:defaults# help Available commands are: 4102 Modify 4102 ap defaults settings apply Commit AP default changes. assign Modify AP default VNS assignment settings SCALANCE WLC711 CLI Reference Guide...
  • Page 18 AP3715i (Wireless AP3715i Internal) AP3715i-1 (Wireless AP3715i-1 Internal) AP3765e (Wireless AP3765e External) AP3765i (Wireless AP3765i Internal) AP3767e (Wireless AP3767e External) AP3801i (Wireless AP3801i Internal) AP3805e (Wireless AP3805e External) AP3805i (Wireless AP3805i Internal) AP3825e (Wireless AP3825e External) SCALANCE WLC711 CLI Reference Guide...

  • Page 19: Logout

    W786-2PROi_FO-1 (Scalance W786-2HPW-Internal-FO-1) W786-2PROi_FO-2 (Scalance W786-2HPW-Internal-FO-2) W786C-2-RJ45 (Scalance W786C-2-RJ45) W786C-2-SFP (Scalance W786C-2-SFP) W786C-2IA-RJ45 (Scalance W786C-2IA-RJ45) W788C-2-M12 (Scalance W788C-2-M12) W788C-2-RJ45 (Scalance W788C-2-RJ45) WB500 (Wireless WB500) logout Use the command to exit the shell immediately. logout logout Parameters None SCALANCE WLC711 CLI Reference Guide...

  • Page 20: Show

    :topology:Admin:l3# show gateway no gateway show Use the command to display the current configuration within a context. show show Parameters None Examples The following example displays the DNS configuration. WLC.siemens.com :dns# show dns 1 192.1.1.3 SCALANCE WLC711 CLI Reference Guide...
  • Page 21 Common Commands show dns 2 192.1.2.3 dns 3 192.1.3.3 SCALANCE WLC711 CLI Reference Guide...

  • Page 22: Chapter 4: Root Commands

    All CLI commands cache changes. For this reason, sometimes when you make a change in a particular context, the change may not be visible immediately. If this happens, you must exit and re-enter the context in order to ensure that the database is synchronized with the latest change. SCALANCE WLC711 CLI Reference Guide...
  • Page 23 Class of Service (CoS) settings to be applied to policies. See cos Commands on page 384. exit The exit command returns to the previous context or exits the shell if you are in the base context. See exit on page 17. SCALANCE WLC711 CLI Reference Guide...
  • Page 24 224. topology The topology command moves you to the topology context of the CLI, providing for defining and configuration of topology objects used by policy and VNS objects. See topology Commands on page 340. SCALANCE WLC711 CLI Reference Guide...

  • Page 25: Audit

    28 pair Use the command to set up two Wireless Appliances as a pair. Use the no form of the command pair to set up Wireless Appliances in stand-alone mode. pair A.B.C.D primary | secondary SCALANCE WLC711 CLI Reference Guide...
  • Page 26 | secondary Parameters Assigns the primary connection point role. primary Assigns the secondary connection point role. secondary Examples The following example sets the current Wireless Appliance to be the primary connection point: WLC.siemens.com :availability# pairrole primary SCALANCE WLC711 CLI Reference Guide...
  • Page 27 Parameters Enable synchronization of the configuration elements. enable Disable synchronization of the configuration elements. disable Example The following example enables the synchronization of the configuration elements: WLC.siemens.com :availability# sync-config enable SCALANCE WLC711 CLI Reference Guide...

  • Page 28: Backup

    | user | dir | file | #file copy tech_support server | user | dir | file | scp | scp password copy upgrade server | user | dir | file | flash | scp | scp password SCALANCE WLC711 CLI Reference Guide...
  • Page 29 Attempting to upload file using ftp SUCCESS: Upload completed. The following command copies an upgrade image for the C25 platform from a server to the Wireless Appliance: WLC.siemens.com # copy apup 192.168.16.21 test new/ap/ C25-0x.xx.xx.000x.img Please input password: SCALANCE WLC711 CLI Reference Guide...
  • Page 30 The following example copies the my_conf.zip export file located on a flash drive to bak_dir directory of the remote SCP server 132.152.1.3 for user tester with password SECRET: WLC.siemens.com # copy configuration to-remote 132.152.1.3 tester bak_dir scp SECRET from-flash my_conf.zip SCALANCE WLC711 CLI Reference Guide...

  • Page 31: Host-Attributes

    WLC.siemens.com :host-attributes# hostname 123 WLC.siemens.com :host-attributes# apply domain Use the command to configure the domain name for the controller. domain After you have run the command, run the command to implement the changes. domain apply SCALANCE WLC711 CLI Reference Guide...
  • Page 32 :host-attributes:dns# dns 1 192.1.1.3 move Use the command in the dns context to reposition DNS servers in the DNS server list. move After you have run the command, run the command to implement the changes. move apply SCALANCE WLC711 CLI Reference Guide...

  • Page 33: Export

    Exports all of the following: controller’s configuration, CDRs, logs, audit information. Exports the controller’s logs. logs Exports the controller’s audit information. audit Exports the specified data to the local drive. local Exports the specified data to the flash drive. flash SCALANCE WLC711 CLI Reference Guide...
  • Page 34 The following example exports all of the following: Configuration, CDRs, logs, audit information: WLC.siemens.com # export all Filename (lab-91-f.16082010.110654): Comment: Please wait... CLI Export start: Mon Aug 16 11:06:59 2010 CLI Export end: Mon Aug 16 11:07:03 2010 Creating lab-91-f.16082010.110654... Backup/Export complete. WLC.siemens.com SCALANCE WLC711 CLI Reference Guide...

  • Page 35: No Export

    Specifies to dismount the flash device. unmount Examples The following example mounts the flash device on the Wireless Appliance: WLC.siemens.com # flash mount The following example dismounts the flash device from the Wireless Appliance: WLC.siemens.com # flash unmount SCALANCE WLC711 CLI Reference Guide...

  • Page 36: No Flash

    FTP or SCP server, you must use the command. For more information, copy configuration copy on page 28. Use the command to remove the specified file from the local or flash no import drive. [no] import filename | number SCALANCE WLC711 CLI Reference Guide...

  • Page 37: Key

    Parameters Specifies the license key to be applied on the Wireless Appliance. The license activation-key key format is: AAAAAAA-11111111-11111111-11111111-11111111. Example The following example applies a license key on the Wireless Appliance: WLC.siemens.com :key# activate ABCDEFG-12345678-22345678-32345678-42345678 SCALANCE WLC711 CLI Reference Guide...

  • Page 38: Loglevel

    1|2|3|4 Parameters Sets the log level of the Wireless Appliance. Sets the log level of the Wireless APs. Indicates Critical severity level. Indicates Major severity level. Indicates Minor severity level. Indicates Informational severity level. SCALANCE WLC711 CLI Reference Guide...

  • Page 39: Ping

    Interface name is the name of any topology with L3 configuration (Physical, topology l3 Admin, B@AC or Routed). radtest Use the command to test the RADIUS server’s connectivity and configuration. radtest radtest vns_name | username | password SCALANCE WLC711 CLI Reference Guide...

  • Page 40: Radtest_Mba

    Sending MAC-based authorization request to Radius Server for mac_str 00:0E: 35:CA:D1:96 on vns_name CNL-206-CPWEP with bss_mac DE:AD:DE:AD:DE:AD and eth_mac DE:AD:DE:AD:DE:AD. Please wait while all configured Radius Servers on this VNS are attempted as needed ... Test Completed. SCALANCE WLC711 CLI Reference Guide...

  • Page 41: Reset

    Wireless Appliance. restart Use the show system_state process command to list the current processes on the Active Controller. For more information, see show system_state on page 69. restart process_id | process_name SCALANCE WLC711 CLI Reference Guide...

  • Page 42: Restore

    Example WLC.siemens.com :secureconnection# secret 200.200.200.200 1234567890123456 weak-ciphers Use the command to enable/disable weak ciphers for a Wireless Appliance and weak-ciphers NetSight Wireless Manager. The weak-ciphers command is available from the secureconnection context of the CLI. SCALANCE WLC711 CLI Reference Guide...

  • Page 43: Show

    56 • show loglevel on page 58 • show ospf on page 59 • show policy on page 60 • show role on page 61 • show wlans on page 61 SCALANCE WLC711 CLI Reference Guide...
  • Page 44 Wireless Appliance. show ac version Parameters None Examples Example code is not currently available. show active-user Use this command to display the currently logged in user. show active-user Parameters None. SCALANCE WLC711 CLI Reference Guide...
  • Page 45 Displays the software version and hardware type of the Wireless AP. version professional_antenna Displays the professional_antenna settings. Examples Example code is not currently available. show ap_certificate Use the command to displays the Wireless AP’s current certificate credentials. show ap_certificate SCALANCE WLC711 CLI Reference Guide...
  • Page 46 Wireless AP’s hardware, software, and connection status. Use the command to display a report of the Wireless APs with a pending or show ap_inventory approved status on the Wireless Appliance. show ap_inventory Parameters None SCALANCE WLC711 CLI Reference Guide...
  • Page 47 TX Max Power Max Operational Rate Preamble Long N Channel Width N Channel Bonding N Guard Interval Long BSS:MAC (radio a) 20:B3:99:E1:79:40 20:B3:99:E1:79:41 BSS:MAC (radio bg) 20:B3:99:E1:79:48 20:B3:99:E1:79:49 BSS:SSID (radio a) SSID: ACTT-208 SSID: cnlcc1404010108410000 SCALANCE WLC711 CLI Reference Guide...
  • Page 48 Wireless Appliance. show availability show availability Parameters None Examples The following example displays availability settings for the Wireless Appliance: WLC.siemens.com # show availability pair paired pairrole secondary pairip 192.168.4.207 fast_failover enabled link_timeout 2 sync-mu disabled SCALANCE WLC711 CLI Reference Guide...
  • Page 49 Specifies the name of the file you want to view. filename 1-9600 Specifies an item number from the file name list. Examples The following example lists the folders containing the call detail records: WLC.siemens.com # show cdrs 20050921wed 20050922thu 20050923fri 20050929thu 20050930fri 20051103thu SCALANCE WLC711 CLI Reference Guide...
  • Page 50 Wireless show clients apserial Use show ap to list the serial numbers of existing Wireless APs. For more information, see show ap page 45. show clients apserial ap_serial SCALANCE WLC711 CLI Reference Guide...
  • Page 51 Client Client User Time SSID Authen Proto Pkts Pkts Bytes Bytes Conn. tica vacy Sent Recvd Sent Recvd tion 172.1 00:40: 00:00: 00:0F CNL- WPA- Global 4937 6.50. 96:AB: :BB: 103- 61:58 F6:A2 Total 4937 SCALANCE WLC711 CLI Reference Guide...
  • Page 52 Specifies the index number of an export file on the list. number Examples The following example displays all the exported text files that contain controller’s configuration, cdrs, logs, audit, or all of them: WLC.siemens.com # show export 1: test-lab6.04102014.174541.zip 2: test-lab6.04102014.174554.zip 3: test-lab6.04102014.174608.zip 4: test-lab6.04102014.174619.zip SCALANCE WLC711 CLI Reference Guide...
  • Page 53 The following example displays the list of files that are saved on the flash device: WLC.siemens.com # show flash list AC-MV-gxs-V5R3.10007.0-1.tar gxs-V5R3.10007.0-1-rescue.tgz show healthpoll Use the command to display the current Health Poll Checking setting. show healthpoll SCALANCE WLC711 CLI Reference Guide...
  • Page 54 1: Test_lab213_V5R3.10007-avail.zip 2: export_lab213_V4R1.7.10_NAMO_ENT.zip 3: lab-213-g.11042008.140940.zip 4: lab-213-g.11042008.141154.zip 5: lab-213-g.11042008.141200.zip 6: lab-213-g.webdomain.com.07032008.144403.zip show import_status Use the command to display the import status of the text file, containing the show import_status controller's configuration. show import_status Parameters None SCALANCE WLC711 CLI Reference Guide...
  • Page 55 Number of Licensed APs for Radar(Foreign): 27 Number of Licensed APs for Radar(Total): 29 Activation key string : PRDKNAM-651RN15N-O8GRUDGK-XJGXUYZU-VJ1HKGP3 Capacity Enhancement Option Keys: show l2ports Use the show l2ports command to display the properties of the Layer 2 ports. show l2ports SCALANCE WLC711 CLI Reference Guide...
  • Page 56 Indicates that the first records in the log will be displayed. first Indicates that the last records in the log will be displayed. last Specifies the number of logs to display from the file. number SCALANCE WLC711 CLI Reference Guide...
  • Page 57 Installing rpm of version V6R1.10029.0 on Thu Aug 20 14:47:39 EDT 2009 Installing rpm of version V6R1.10602.0 on Mon Sep 13 05:11:30 EDT 2010 Installing rpm of version 07.41.01.0122T on Mon Sep 13 05:31:02 EDT 2010 WLC.siemens.com SCALANCE WLC711 CLI Reference Guide...
  • Page 58 Wireless Appliance or the show loglevel Wireless AP. show loglevel ac | ap Parameters Displays the log level of the Wireless Appliance. Displays the log level of the Wireless AP. SCALANCE WLC711 CLI Reference Guide...
  • Page 59 The following example displays the details of all OSPF interfaces: WLC.siemens.com # show ospf interface OSPF Interface #0: Port Name :esa0 OSPF Status :Enabled OSPF authentication :None Link Cost Hello Interval Dead Interval Retransmit Interval Transmit Delay SCALANCE WLC711 CLI Reference Guide...
  • Page 60 Sequence No Checksum Route 0.0.0.0 192.1.5.115 0x80000030 0x160a 0.0.0.0/0 10.22.1.0 192.168.3.2 0x800006f1 0x30e9 10.22.1.0/24 show policy Use the command to display configuration information for all polices configured on the show policy Wireless Appliance. show policy SCALANCE WLC711 CLI Reference Guide...
  • Page 61 CNL-218-0-1-default CNL-218-0-1 no-change routed CNL-218-0-1-non-authenticated CNL-218-0-1 no-change routed CNL-218-0-2-default CNL-218-0-2 no-change b@ac show wlans Use the command to display a list of all WLAN Services configured on the Wireless show wlans Appliance. show wlans SCALANCE WLC711 CLI Reference Guide...
  • Page 62 The following example displays a list of activity reports available on the Wireless Appliance: WLC.siemens.com # show report reports: active_clients active_clients_by_vns active_clients_by_wireless_apserial active_wireless_aps active_wireless_load_groups admission_control_wireless_aps ap_availability clients_by_Current_WLC clients_by_home external_connection mesh_wds_wlan_wireless_ap_stats mobility_tunnel_matrix policy_filter_stats radius_stats remotable_vns_information remote_states SCALANCE WLC711 CLI Reference Guide...
  • Page 63 Tunnel with 10.109.0.1 Disconnected ac_ip 10.209.0.1 ac_ixp_addr 10.209.0.1 ac_desc Tunnel with 10.109.0.4 Disconnected Tunnel with 10.109.0.1 Disconnected The following example displays client connected to foreign WLC: WLC.siemens.com # show report clients_by_foreign_ ac_ip 10.109.0.1 ac_ixp_addr 10.109.0.1 SCALANCE WLC711 CLI Reference Guide...
  • Page 64 See show import on page 54. show restore show routes Use the command to display the routing table or static routes of the Wireless Appliance. show routes show routes all | static SCALANCE WLC711 CLI Reference Guide...
  • Page 65 /home/user/destdir type all freq daily everyday starttime 02:00 destination remote show schedule_upgrade command to display the current scheduled upgrade settings. show schedule_upgrade show schedule_upgrade Parameters None Examples WLC.siemens.com # show schedule_upgrade schld_upgrd 10:01:01:02 local AC-MV-07.41.03.0003-1.rue SCALANCE WLC711 CLI Reference Guide...

  • Page 66: Show Snmp

    Parameters Displays properties of an Wireless AP. Specifies the serial number of an Wireless AP. ap_serial Displays the hardwired connection. wired Displays the wireless connection. wireless Displays radio1 statistics. radio1 Displays radio2 statistics. radio2 SCALANCE WLC711 CLI Reference Guide...
  • Page 67 MAC Address: 00:0F:BB:09:EC:E1 MAC Address: 00:0F:BB:09:EC:E2 MAC Address: 00:0F:BB:09:EC:E3 MAC Address: 00:0F:BB:09:EC:E4 SSID: CNL-91-0-0-ssid SSID: CNL-91-0-1-ssid SSID: CNL-91-0-2-ssid SSID: CNL-91-0-3-ssid SSID: CNL-91-WDS-ssid Operational Max Rate: 54 Channel: 157:5785MHz Current Power Level(dBm): 0 IP Address: 10.91.0.50 SCALANCE WLC711 CLI Reference Guide...
  • Page 68 1419 Broadcast Frames Transmitted: 2852 Broadcast Frames Received: 1197 Pause Frames Transmitted: Pause Frames Received: Frame Check Sequence Error: Frame Too Long Errors: show syslog Use the command to display system log levels. show syslog SCALANCE WLC711 CLI Reference Guide...
  • Page 69 Displays the information on various processes run by the system. info Displays hardware information about the controller. manufacturing Examples Example code is not currently available. show tech_support Use the command to display a list of technical support files available on the show tech_support system. SCALANCE WLC711 CLI Reference Guide...

  • Page 70: Show Time

    Parameters None Examples The following example displays the system time and time server settings: WLC.siemens.com # show time-config ntp: internal ntp server SCALANCE WLC711 CLI Reference Guide...
  • Page 71 None Examples The following is the example of the status display when the traffic capture is running: WLC.siemens.com # show traffic_capture Interface: Size: 1000(MB). Filename: mgmt_traffic_dump.cap Destination: local Capture Status: stopped Traffic Capture Files: 1:mgmt_traffic_dump.cap SCALANCE WLC711 CLI Reference Guide...
  • Page 72 192.168.4.181 admin abc123 / backupClone.tgz show upgrade_history Use the command to display the software upgrade history. show upgrade_history show upgrade_history Parameters None Examples WLC.siemens.com # show upgrade_history Date Type Version Thu Feb 24 11:41:00 EST 2011 Upgraded 07.41.01.0150 SCALANCE WLC711 CLI Reference Guide...
  • Page 73 The following example displays the users defined on the Wireless Appliance: WLC.siemens.com # show users Privilege admin admin test admin show vnsmode Use the command to display all VNS information for every VNS on the Wireless show vnsmode Appliance. show vnsmode Parameters None SCALANCE WLC711 CLI Reference Guide...

  • Page 74: Show Web

    134.14.12.23 1812:1813 test-radius 10.10.10.10 1812:1813 show web Use the command to display the web timeout time (in minutes) — the time after which the show web web session will time out. show web Parameters None SCALANCE WLC711 CLI Reference Guide...

  • Page 75: Shutdown

    | nostats | ac | log | all | filename no tech_support | filename | number Parameters Collects Wireless AP information. Collects Wireless Appliance information. Collects log information. Collects Wireless AP, Wireless Appliance, and log information. Specifies the file name. filename SCALANCE WLC711 CLI Reference Guide...

  • Page 76: Traceroute

    Identifies the source interface by number. The numbers are platform specific. number id Specifies an IP address. The IP address can be either IPv4 A.B.C.D or IPv6 IP Address A:B:C:D:E:F:G:H format. SCALANCE WLC711 CLI Reference Guide...

  • Page 77: Upgrade Ac

    Backs up the existing operating system of the controller to the remote FTP bckto ftp server. The FTP server is set by the upgrade_backup_dest command. Backs up the existing operating system of the controller to the external bckto flash filename flash. SCALANCE WLC711 CLI Reference Guide...

  • Page 78: Upgrade Apup

    Do you wish to continue? (y/n) Y upgrade apup Use the command to upgrade the software of the Wireless AP. The upgrade apup upgrade apup command is accessible from the root context of the CLI. SCALANCE WLC711 CLI Reference Guide...

  • Page 79: Upgrade_Backup_Dest

    The following example backs up the controller’s existing software image on the remote ftp server: WLC.siemens.com # upgrade_backup_dest 192.168.4.181 administrator abc123 / backup backupFile-rescue-user.tgz upgrade_image_src Use the command to locate the new software image on the remote server. upgrade_image_src upgrade_image_src server | user | password | dir | file SCALANCE WLC711 CLI Reference Guide...
  • Page 80 The directory where the new software image is located. The file name of the software image. file Example The following example locates the new software image on the remote server: WLC.siemens.com # upgrade_image_src 192.168.4.10 test abc123 /ac/rpm/build09.12.01.0067 AC-MV-09.12.01.0067-1.txe SCALANCE WLC711 CLI Reference Guide...

  • Page 81: Chapter 5: Ap Commands

    Serial commands that are common to other ap: contexts are located in the Common Commands on page 107 section. Commands that are available only to the <serial>: context are located in the Serial Commands on page 144 section. SCALANCE WLC711 CLI Reference Guide...

  • Page 82: Ap Context

    Rehoming is enabled if availability is enabled between two V9.01 and higher controllers. Both Controllers need to be in the same regulatory domain. Sensors and APs in WDS/MESH configurations cannot be rehomed. APs in load groups will be removed from the load group if they are rehomed. SCALANCE WLC711 CLI Reference Guide...
  • Page 83 Specifies the directory containing the file. Specifies the file name. file Examples The following example exports the MAC address list to a file on a server: WLC.siemens.com :ap:blacklist# export 192.168.1.6 mgrey /mgrey/home MAClist.txt Please input password: Attempting to upload file... SCALANCE WLC711 CLI Reference Guide...
  • Page 84 OUI has a mask value of 24 • an IAB has a mask value of 36 Examples The following example adds a MAC address to the MAC address list: WLC.siemens.com :ap:blacklist# mac 43:0D:37:5C:8A:12 WLC.siemens.com :ap:blacklist# show mac-list-mode black 43:0D:37:5C:8A:12 SCALANCE WLC711 CLI Reference Guide...
  • Page 85 | disable Parameters Enables mac-list-sync-mode, which synchronizes MAC addresses between enable controllers configured as blacklisted or whitelisted. Disables mac-list-sync-mode, so that blacklisted or whitelisted MAC addresses are disable not synchronized between controllers. SCALANCE WLC711 CLI Reference Guide...
  • Page 86 • country on page 109 • ipmcast-assembly on page 109 • lbs-status on page 109 • led-mode on page 110 • lldp on page 111 • persistent on page 111 • poll_timeout on page 112 SCALANCE WLC711 CLI Reference Guide...
  • Page 87 The following commands are available in the ap:defaults:ap38xx context: • balanced-power • bcast_disassoc on page 108 • client_session on page 108 • country on page 109 • ipmcast-assembly on page 109 • lbs-status on page 109 • led-mode on page 110 SCALANCE WLC711 CLI Reference Guide...
  • Page 88 The command is accessible from the ap:defaults context of the CLI. assign The following commands are available in the ap:defaults:assign context: • wlans-list on page 89 • wlans-foreign-ap on page 89 SCALANCE WLC711 CLI Reference Guide...
  • Page 89 Wireless AP default configuration for Wireless Outdoor APs. dualband The dualband command is available from the ap:defaults context of the CLI. The following commands are available in the ap:defaults:dualband context: • balanced-power • bcast_disassoc on page 108 • client_session on page 108 SCALANCE WLC711 CLI Reference Guide...
  • Page 90 The following commands are available in the ap:defaults:std context: • balanced-power • bcast_disassoc on page 108 • client_session on page 108 • country on page 109 • lbs-status on page 109 • led-mode on page 110 SCALANCE WLC711 CLI Reference Guide...
  • Page 91 FTP server. The command is accessible from the ap context of the CLI. import_drm When the system prompts you to input password, you must enter the FTP server’s password. import_drm server | user | dir | file_name SCALANCE WLC711 CLI Reference Guide...
  • Page 92 WLAN to the load group. See assign-radio on page 94 and assign-wlan on page command is accessible from the ap:load-groups context of the CLI. create create load group name | radio | client SCALANCE WLC711 CLI Reference Guide...
  • Page 93 The following commands are available in the ap:load-groups:<named-load-group> context. The commands available to you depend on the type of load group you are configuring, either radio or client (see create on page 92). • assign-ap on page 94 • assign-radio on page 94 SCALANCE WLC711 CLI Reference Guide...
  • Page 94 | radio2 | both The radios that you want to assign or unassign. If you assign radios that are currently assigned to another load group, the radios will automatically be removed from the other load group. SCALANCE WLC711 CLI Reference Guide...
  • Page 95 This example enables band preference steering for the radio load group named radiogroup1: WLC.siemens.com :ap:load-groups:radiogroup1# bandpreference enable name Use the command to change the name of a load group.The command is accessible from name name the ap:load-groups:<named-load-group> context of the CLI, for both types of load groups. SCALANCE WLC711 CLI Reference Guide...
  • Page 96 Specifies the radio being configured. Specifies the maximum number of clients for the specified radio. Can be an max-clients integer between 5 and 60. Usage For access to this command, the radioN-loadcontrol command must be enabled. SCALANCE WLC711 CLI Reference Guide...
  • Page 97 Load control can be enabled on one radio and disabled on the other. Members of a WLAN load control group are assigned to both radios and cannot be load controlled individually. radio2-loadcontrol enable | disable Parameters enable | disable Enables or disables the load control function on Radio2. Usage SCALANCE WLC711 CLI Reference Guide...
  • Page 98 | disable Parameters enable | disable Enables or disables the strict enforcement of load limits on Radio2. Usage Radio Load Control must be enabled for this radio before this command can take effect. SCALANCE WLC711 CLI Reference Guide...
  • Page 99 CLI. show show Parameters None. Examples The following example displays the load groups: WLC.siemens.com :ap:load-groups# show Load Groups: Name: loadgroup1 Type: radio Name: loadgroup2 Type: client SCALANCE WLC711 CLI Reference Guide...
  • Page 100 Wireless AP’s software image. The command is upgrd upgrd accessible from the ap:maintenance context of the CLI. After you run the command to upgrade the Wireless AP’s software image, run the upgrd apply command. upgrd default | control SCALANCE WLC711 CLI Reference Guide...
  • Page 101 The command is accessible from the ap:registration context of the CLI. cluster-encryption cluster-encryption enable | disable Parameters enable | disable Enables or disables the encryption for the cluster shared secret. SCALANCE WLC711 CLI Reference Guide...
  • Page 102 The Wireless AP will make a specified number of attempts to register its serial number with the Wireless Appliance following a registration failure. The command is accessible from the dretry ap:registration context of the CLI. dretry number SCALANCE WLC711 CLI Reference Guide...
  • Page 103 Wireless APs without connection approval are put into a pending state, and an administrator has to manually approve those connections. security no security Parameters None Examples The following example allows only approved Wireless APs to connect to the Wireless Appliance: WLC.siemens.com :ap:registration# security SCALANCE WLC711 CLI Reference Guide...
  • Page 104 Wireless AP by specifying its MAC address, IP search Address, or User ID. The command is accessible from the ap context of the CLI. search search mmac MAC Address | mip IP Address | muser string SCALANCE WLC711 CLI Reference Guide...
  • Page 105 Specifies the role of the Wireless AP — whether access point or sensor. ap role Specifies a descriptive word for the Wireless AP. description Examples The following example adds a Wireless AP to the Wireless Appliance: WLC.siemens.com :ap# serial 0409920201203751 Orlandoe_4_P2 AP3805i ap SCALANCE WLC711 CLI Reference Guide...
  • Page 106 117 for commands in the radio2 contexts. • rightantenna-radio1 on page 154 • rightantenna-radio2 on page 155 • secure-tunnel on page 115 • secure-tunnel-lifetime on page 115 • show on page 116 • telnet on page 117 SCALANCE WLC711 CLI Reference Guide...

  • Page 107: Ap Common Commands

    | disable Parameters Power settings apply to all channels in the channel list. enable Power settings do not apply to all channels in the channel list. disable SCALANCE WLC711 CLI Reference Guide...
  • Page 108 CLI. After you run the command, run the command to implement the change in client_session apply client session. client_session no client_session Parameters None Examples The following example enables user client sessions: WLC.siemens.com :ap:defaults:11n# client_session SCALANCE WLC711 CLI Reference Guide...
  • Page 109 (AeroScout or lbs-status Ekahau) tags for all 802.11n APs. The command is accessible from the ap:defaults:11n, lbs-status ap37xx, ap38xx, ap3801, 4102, dualband, and std contexts of the CLI. lbs-status enable | disable SCALANCE WLC711 CLI Reference Guide...
  • Page 110 Only options normal and off are allowed in the ap:defaults contexts. Examples The following example turns off LED activity: WLC.siemens.com :ap:defaults:11n# led-mode off The following example configures the LED mode to indicate WDS signal strength: WLC.siemens.com :ap:0409920201202222# led-mode wds-signal SCALANCE WLC711 CLI Reference Guide...
  • Page 111 Use the no form of the command to disable the feature. The command is persistent accessible from the ap:<serial> and ap:defaults:11n, ap37xx, ap38xx, ap3801, and std contexts of the CLI. persistent no persistent Parameters None SCALANCE WLC711 CLI Reference Guide...
  • Page 112 AP type radio and radio mode. • admin-mode on page 119 • antsel on page 119 • atpc on page 119 • on page 120 • beaconp on page 120 SCALANCE WLC711 CLI Reference Guide...
  • Page 113 136 • rss-threshold on page 137 • on page 137 • stbc on page 137 • tx_adjust_power on page 138 • txbf on page 138 • tx_max_power on page 139 • tx_min_power on page 139 SCALANCE WLC711 CLI Reference Guide...
  • Page 114 • n_ptype on page 133 • nonUnicastQuota on page 134 • optimized-mcast on page 134 • pmode on page 134 • prate on page 135 • preamble on page 135 • probe-suppression on page 136 SCALANCE WLC711 CLI Reference Guide...
  • Page 115 (the number of secure-tunnel-lifetime hours the tunnel remains enabled) of this tunnel. The command is secure-tunnel-lifetime accessible from the ap:<serial> and ap:defaults:11n ap37xx, ap38xx, and ap3801 contexts of the CLI. secure-tunnel-lifetime hours SCALANCE WLC711 CLI Reference Guide...
  • Page 116 United States no lldp led-mode normal lbs-status enabled secure-tunnel data secure-tunnel-lifetime 24 ipmcast-assembly disabled The following example displays ap37xx information: WLC.siemens.com :ap:defaults:ap37xx# show ssh enabled poll_timeout 22 client_session persistent SCALANCE WLC711 CLI Reference Guide...

  • Page 117: Radio Commands

    The commands in this section are common to multiple radio1 and radio2 commands in the ap:defaults: 11n, ap:defaults, , ap:defaults:ap37xx, ap:defaults:ap38xx, ap:defaults:ap3801, ap:defaults:dualband, ap:defaults:std, and ap:<serial> contexts. • admin-mode on page 119 • antsel on page 119 SCALANCE WLC711 CLI Reference Guide...
  • Page 118 • ptype on page 136 • on page 137 • stbc on page 137 • tx_adjust_power on page 138 • txbf on page 138 • tx_max_power on page 139 • tx_min_power on page 139 SCALANCE WLC711 CLI Reference Guide...
  • Page 119 Auto Tx Power Ctrl (ATPC). Use the no form of the command to atpc disable the ATPC feature. The command is accessible from all radio1 and radio2 contexts of the atpc CLI. After you run the command, run the command to implement the change. atpc apply SCALANCE WLC711 CLI Reference Guide...
  • Page 120 50-1000 Parameters Specifies the number of time units (milliseconds) between beacon 50-1000 transmissions. Example The following example sets the time between successive beacons to 70 ms on Radio 2: WLC.siemens.com :ap:defaults:11n:radio2# beaconp 70 SCALANCE WLC711 CLI Reference Guide...
  • Page 121 Dynamic Channel Selection (DCS) feature. The command is accessible from all radio contexts of the CLI. commands are described in the DCS Commands on page 140. SCALANCE WLC711 CLI Reference Guide...
  • Page 122 CLI. divtx ( alternate | left | right ) Parameters alternate | left | right Specifies the antenna for selection. Example The following example selects the right antenna: WLC.siemens.com :ap:defaults:dualband:radio1# divtx right SCALANCE WLC711 CLI Reference Guide...
  • Page 123 3801, and ap <serial> radio contexts for ap37xx and ap38xx APs when probe-suppression is enabled. force-disassociate enable | disable Parameters disable | enable Enables or disables force disassociate for this radio context. SCALANCE WLC711 CLI Reference Guide...
  • Page 124 2, 4, 6, 8, 10 for the five values, you would enter 2468a, where a specifies 10 for the turbo voice transmission queue value. hwretries BK BE VI VO TVO Parameters Specifies the number of retries for the Background transmission queue. Specifies the number of retries for the Best Effort transmission queue. SCALANCE WLC711 CLI Reference Guide...
  • Page 125 If the mode is b or bg, valid values are 1, 2, 5.5, and 11. If the mode is a or g, valid values are 6, 12, or 24. SCALANCE WLC711 CLI Reference Guide...
  • Page 126 When the mode is bg, valid values are :1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54. When the mode is g or a, valid values are: 6, 9, 12, 18, 24, 36, 48, and 54. Example The following example sets the maximum operational rate to 24Mbps: WLC.siemens.com :ap:defaults:dualband:radio1# maxoprate 24 SCALANCE WLC711 CLI Reference Guide...
  • Page 127 Use this command to configure the minimum basic data rate for radio 2. The command is minbrate accessible from all radio contexts of the CLI. minbrate min-rate Parameters Valid values for min-rate depend on the radio mode: SCALANCE WLC711 CLI Reference Guide...
  • Page 128 Syntax: (11n and ap37xx, radio2) mode b | g | gn | n-strict | bg | bgn Syntax: (dualband) mode a | b | g | bg Syntax: (4102 and std, radio2) mode b | g | bg SCALANCE WLC711 CLI Reference Guide...
  • Page 129 ADDBA support. Use the command to disable n_addba_support the feature. The command is accessible from the ap:defaults:11n, ap37xx, ap38xx, n_addba_support ap3801, and ap:<serial> contexts of the CLI for those APs that support it. n_addba_support no n_addba_support SCALANCE WLC711 CLI Reference Guide...
  • Page 130 1024 to 65535. When the radio mode is anac or ac-strict, the range of values allowed is 1024 to 1048575. Example The following example sets the maximum length of the aggregate MPDU to 5000 bytes: WLC.siemens.com :ap:defaults:11n:radio2# n_aggr_mpdu_max 5000 SCALANCE WLC711 CLI Reference Guide...
  • Page 131 <serial> contexts of the CLI for those APs that support it. n_chlwidth ( 20 | 40 | 80 | auto) SCALANCE WLC711 CLI Reference Guide...
  • Page 132 <serial> contexts of the CLI for those APs that support it. n_pbthreshold 0-100 Parameters Specifies the extension channel threshold value as a percentage. 0-100 SCALANCE WLC711 CLI Reference Guide...
  • Page 133 Specifies Clear to Send (CTS) protection type. cts only Specifies Receive to Send (RTS) / Clear to Send (CTS) protection type. rts cts Example The following example sets the clear to send (CTS) protection type: WLC.siemens.com :ap:defaults:11n:radio2# n_ptype cts only SCALANCE WLC711 CLI Reference Guide...
  • Page 134 Use none only if the Wireless AP will NOT be servicing 802.11b clients, and there are no 802.11b clients or Wireless APs sharing the same air space. pmode ( none | auto | always ) SCALANCE WLC711 CLI Reference Guide...
  • Page 135 CLI. preamble ( short | long ) Parameters Specifies short preambles short Specifies long preambles long Example The following example enables the long option for the preamble type: WLC.siemens.com :ap:defaults:11n:radio2# preamble long SCALANCE WLC711 CLI Reference Guide...
  • Page 136 Specifies the Clear to Send (CTS) type. cts only Specifies the Request to Send (RTS) and Clear to Send (CTS) types rts cts Example The following example sets the protection type to CTS: WLC.siemens.com :ap:defaults:11n:radio2# ptype cts only SCALANCE WLC711 CLI Reference Guide...
  • Page 137 Use the command to enable or disable the 11n advanced STBC feature. The command is stbc stbc accessible from the ap:defaults:ap37xx, ap38xx, ap3801, and <serial> radio1 and radio2 contexts of the CLI. stbc enable | disable SCALANCE WLC711 CLI Reference Guide...
  • Page 138 11n advanced TXBF feature. The command is txbf txbf accessible from the ap:defaults:ap37xx, ap38xx (radio2 only), ap3801, and <serial> radio contexts of the CLI. txbf enable | disable Usage When TXBF is enabled, antenna selection must be left-middle-right. SCALANCE WLC711 CLI Reference Guide...
  • Page 139 CLI. The tx_min_power is available only when Auto Tx Power Ctrl (ATPC) is enabled. tx_min_power value Parameters Specifies the value in dBm. value Example The following example specifies the minimum Tx power level to 8 dBm: WLC.siemens.com :ap:defaults:ap37xx:radio1# tx_min_power 8 SCALANCE WLC711 CLI Reference Guide...

  • Page 140: Dcs Commands

    Radio 2 uses 3 channels for countries supporting 11 channels and 4 channels for auto countries supporting 13 channels. Radio 2 uses 3 channels. 3-channel Radio 2 uses 4 channels. 4-channel Radio 2 uses the channels that are listed, separated by commas. channel [,channel] SCALANCE WLC711 CLI Reference Guide...
  • Page 141 Specifies the DCS noise threshold in dB. The DCS noise threshold must be in the -95 to -50 thrshold range. ACS will scan for a new operating channel for the Wireless AP if the threshold is exceeded. SCALANCE WLC711 CLI Reference Guide...
  • Page 142 1: 2412 MHz 2: 2417 MHz 3: 2422 MHz 4: 2427 MHz 5: 2432 MHz 6: 2437 MHz 7: 2442 MHz 8: 2447 MHz 9: 2452 MHz 10: 2457 MHz 11: 2462 MHz WLC.siemens.com :ap:defaults:std:radio1:dcs# radio_channels SCALANCE WLC711 CLI Reference Guide...
  • Page 143 Range is 1 to 15 minutes, or 0 to disable. Example The following example sets the DCS update period to 12 minutes: WLC.siemens.com :ap:defaults:ap37xx:radio1:dcs# update_period 12 The following example disables the DCS update period: WLC.siemens.com :ap:defaults:ap37xx:radio1:dcs# update_period 0 SCALANCE WLC711 CLI Reference Guide...

  • Page 144: Serial Commands

    Wireless AP. The command is accessible from the ap:<serial> context of 802_1x the CLI. The following commands are available in the ap:<serial>:802_1x context: • on page 145 • gen_certreq on page 145 • peap on page 146 SCALANCE WLC711 CLI Reference Guide...
  • Page 145 The name of the unit within the organization to which the AP belongs name, unit The email address of the organization to which the AP belongs email email_addr Specifies that the certificate supports key size. Valid key size values are 1024 or key-size 2048. SCALANCE WLC711 CLI Reference Guide...
  • Page 146 Specifies the rank number of the listed Wireless Appliance rank Examples The following example adds three IP addresses to the Wireless Appliance list: WLC.siemens.com :ap:0409920201204003# aclist 6.178.34.54 WLC.siemens.com :ap:0409920201204003# aclist 81.30.6.312 WLC.siemens.com :ap:0409920201204003# aclist 167.232.92.39 SCALANCE WLC711 CLI Reference Guide...
  • Page 147 :ap:0500010032150135 antennaleft WS-ANT01 AG 4dBi Omni Factory This example removes a configured left antenna: WLC.siemens.com :ap:0500010032150135 antennaleft No Antenna antennamiddle Currently this command is not supported. antennamiddle antenna_model Parameters Model name of an antenna supported by the Wireless AP. antenna_model SCALANCE WLC711 CLI Reference Guide...
  • Page 148 :ap:0500010032150135# antennaright Usage: antennaright <antenna_model> antenna_model: <list of valid antenna models> WS-ANT01 AG 4dBi Omni Factory No Antenna WLC.siemens.com :ap:0500010032150135# antennaright WS-ANT01 AG 4dBi Omni Factory This example removes a configured right antenna: WLC.siemens.com :ap:0500010032150135# antennaright No Antenna SCALANCE WLC711 CLI Reference Guide...
  • Page 149 Use the command to change the description of the Wireless AP. The command is accessible desc desc from the ap:<serial> context of the CLI. desc new_description Parameters Specifies a description of the Wireless AP. new_description SCALANCE WLC711 CLI Reference Guide...
  • Page 150 :ap:0500010032150135# leftantenna-radio2 No Antenna location Use the command to set the location string for the specified AP. The command is location location accessible from the ap:<serial> context of the CLI. location location | no location SCALANCE WLC711 CLI Reference Guide...
  • Page 151 <list of valid antenna models> WS-ANT02 AG 4dBi Omni Factory No Antenna WLC.siemens.com :ap:0500010032150135 middleantenna-radio1 WS-ANT02 AG 4dBi Omni Factory This example removes a configured middle antenna for radio1: WLC.siemens.com :ap:0500010032150135# middleantenna-radio1 No Antenna SCALANCE WLC711 CLI Reference Guide...
  • Page 152 + | - rank2 Parameters Specifies the rank of the listed item to be moved rank1 Move rank one position above or below the rank2 item + | - Specifies the rank of the second item rank2 SCALANCE WLC711 CLI Reference Guide...
  • Page 153 The following example sets the Ethernet port on the AP to auto: WLC.siemens.com :ap:0500008043050212# port-setting auto professional_antenna command moves you into the professional-antenna context, which professional_antenna contains commands to configure professional antenna attributes. The professional_antenna command is accessible from the ap:<serial> context of the CLI. SCALANCE WLC711 CLI Reference Guide...
  • Page 154 <antenna_model> antenna_model: <list of valid antenna models> WS-AO-2S03360 G 3.5 dBi Omni No Antenna WLC.siemens.com :ap:0500010032150135# rightantenna-radio1 WS-AO-2S03360 G 3.5 dBi Omni This example removes a configured right radio1 antenna: WLC.siemens.com :ap:0500010032150135# rightantenna-radio1 No Antenna SCALANCE WLC711 CLI Reference Guide...
  • Page 155 DHCP. Use the no form of the command to statically configure a usedhcp Wireless AP. The command is accessible from the ap:<serial> context of the CLI. usedhcp usedhcp no usedhcp Parameters None SCALANCE WLC711 CLI Reference Guide...
  • Page 156 Example Example code is not currently available. zone Use the zone command to create a policy zone for the named Wireless AP. The command is accessible from the ap:<serial> context of the CLI. zone name SCALANCE WLC711 CLI Reference Guide...
  • Page 157 The following example sets the policy zone for AP 0500008043050212 to “Newbury”: WLC.siemens.com :ap:0500008043050212# zone Newbury WLC.siemens.com :ap:0500008043050212# show Policy Zone: Newbury SW Version: 08.11.01.0055 Hardware Type: Wireless AP2620-1 External Tunnel Type: unsecured Wired MAC Address: 00:0F:C8:F0:1B:3C Home: LOCAL Static IP Address: 10.201.0.172 Status: APPROVED Port#: SCALANCE WLC711 CLI Reference Guide...

  • Page 158: Chapter 6: L2Ports Commands

    Disables jumbo frames on all controller Layer 2 ports. disable Usage The standard Ethernet frame MTU for untagged packets is 1518 bytes including the 18 Ethernet header bytes. The standard Ethernet frame MTU for tagged packets is 1522 bytes. SCALANCE WLC711 CLI Reference Guide...

  • Page 159: Named-Lag-Port

    L2 port name Examples The following example attaches the esa1 port in an l2ports:lag1# context: WLC.siemens.com # l2ports WLC.siemens.com :l2ports# lag1 WLC.siemens.com :l2ports:lag1# lag-member add esa1 WLC.siemens.com :l2ports:lag1# apply WLC.siemens.com :l2ports:lag1# show LAG members: esa1 WLC.siemens.com :l2ports:lag1# SCALANCE WLC711 CLI Reference Guide...
  • Page 160 Examples The following example enables the administration status of lag-member ports in an l2ports:lag1# context: WLC.siemens.com # l2ports WLC.siemens.com :l2ports# lag1 WLC.siemens.com :l2ports:lag1# port enable WLC.siemens.com :l2ports:lag1# apply WLC.siemens.com :l2ports:lag1# show Admin: enable WLC.siemens.com :l2ports:lag1# SCALANCE WLC711 CLI Reference Guide...

  • Page 161: Chapter 7: Ip Commands

    Specifies the subnet mask in CIDR format /netmask Specifies the gateway gateway Does not override Open Shortest Path First (OSPF) learned route float Overrides OSPF learned route nofloat Specifies index number of route on the routing table routeId SCALANCE WLC711 CLI Reference Guide...

  • Page 162: Ospf

    164 — See for commands in the ip:ospf:ospfinterface context. If ospfinterface does not appear in the ip:ospf context command list, use the command to enable OSPF. status area Use the command to define the area identification of the OSPF interface. area area area_id SCALANCE WLC711 CLI Reference Guide...
  • Page 163 IP address of the router originating Open Shortest Path routerid First (OSPF) packets. routerid IP Address Parameters Specifies the IP address of the router originating OSPF packets IP Address Examples The following example sets the routerid to 1.1.1.1: WLC.siemens.com :ip:ospf# routerid 1.1.1.1 SCALANCE WLC711 CLI Reference Guide...
  • Page 164 Parameters ospf interface name Specifies the name for the new ospf interface. The name must already be created as a physical or b@ac topology in the topology context. SCALANCE WLC711 CLI Reference Guide...
  • Page 165 Use the no form of the authkey command to clear the password. Authentication must be configured to use a password before this command can be used. For more information, see authtype on page 166. authkey password no authkey SCALANCE WLC711 CLI Reference Guide...
  • Page 166 The following example sets the time to wait for a packet response to 300 seconds: WLC.siemens.com :ip:ospf:ospfinterface:top1# deadinterval 300 hellointerval Use the command to specify the time interval between the transmission of OSPF Hello hellointerval packets to devices on the network. hellointerval 1-65535 SCALANCE WLC711 CLI Reference Guide...
  • Page 167 The following example sets the retransmission time interval to five seconds: WLC.siemens.com :ip:ospf:ospfinterface:top1# retransmitinterval 5 status Use the command to enable or disable OSPF advertising on the port. status status ( enable | disable ) SCALANCE WLC711 CLI Reference Guide...
  • Page 168 1-65535 Parameters Specifies the amount of time in seconds 1-65535 Examples The following example sets the delay time for transmission to one second: WLC.siemens.com :ip:ospf:ospfinterface:top1# transmitdelay 1 SCALANCE WLC711 CLI Reference Guide...

  • Page 169: Chapter 8: Login Commands

    170 — See for commands in the login:auth context. • auth-order on page 172 • move on page 173 • show on page 174 apply Use the command to save login configuration changes. apply apply SCALANCE WLC711 CLI Reference Guide...

  • Page 170: Auth

    Use the command to set the RADIUS server as the primary server for authentication. Use the primary no form of the command to disable it. The command is available from the login:auth context. primary primary server_name SCALANCE WLC711 CLI Reference Guide...
  • Page 171 Use the command to change the order of the RADIUS server in the list of RADIUS servers. The move command is available from the login:auth context. move move #1 { + | - } #2 SCALANCE WLC711 CLI Reference Guide...

  • Page 172: Auth-Order

    Use the command to add an authentication mode to the end of the ordered list of auth-order authentication modes. You can also delete an authentication mode from the ordered list. delete radius local auth-order add | SCALANCE WLC711 CLI Reference Guide...

  • Page 173: Move

    2 authentication method: radius move Use the command to change the order of authentication modes in the authentication mode move ordered list. move order order Parameters Specifies the current priority of the authentication mode. order SCALANCE WLC711 CLI Reference Guide...

  • Page 174: Show

    Login mode has changed. CLI will terminate in 5 seconds! ************************************************************ show Use the command to display the currently configured authentication modes and their priorities. show show Parameters None Examples WLC.siemens.com :login# show 1 authentication method: local SCALANCE WLC711 CLI Reference Guide...

  • Page 175: Chapter 9: Radar Commands

    Common Scan Group/Profile Commands Note Radar “In-Service Scan Profile” functions are currently not supported on SCALANCE WLC711 controllers. Any references in this chapter to In-Service scans do not apply until further notice. The legacy Mitigator commands and functions related to “Out-of-service scan profiles” are available.
  • Page 176 The values from 0 to 20 are accepted. Examples The following example sets the IP address of the Data Collection Engine and the required intervals, and then applies the changes: WLC.siemens.com :mitigator# wcswip 123.456.789.101 3 1 WLC.siemens.com :mitigator# apply SCALANCE WLC711 CLI Reference Guide...
  • Page 177 Specifies the scan type — active or passive Specifies to add the Wireless APs by their serial numbers to the scan group. serial Specifies the serial number of the Wireless APs that are to be added to the scan serial group SCALANCE WLC711 CLI Reference Guide...
  • Page 178 Example The following example sets the current channel to be scanned: WLC.siemens.com :mitigator:scgroup:South Block# channel current WLC.siemens.com :mitigator:scgroup:South Block# apply dtime Use the command to modify the Channel Dwell Time of the scan group. dtime SCALANCE WLC711 CLI Reference Guide...
  • Page 179 Parameters Specifies radio 1 to be used radio1 Specifies radio 2 to be used radio2 Specifies both radio 1 and radio 2 both SCALANCE WLC711 CLI Reference Guide...
  • Page 180 WLC.siemens.com :mitigator:scgroup:South Block# apply type Use the command to modify the scan type — active or passive. type After you run the command, run the command to implement the change. type apply type active|passive Parameters SCALANCE WLC711 CLI Reference Guide...
  • Page 181 InService profile can do Rogue AP scanning as well. Rogue scanning can be enabled after Security scan has been enabled. The following commands are available in the mitigator:scprof context: • create on page 182 • delete on page 182 SCALANCE WLC711 CLI Reference Guide...
  • Page 182 • show on page 197 • blacklist-timer on page 189 • dosa on page 192 • drop-faf on page 192 • external-friendly on page 193 • external-honeypot on page 193 • internal-honeypot on page 193 SCALANCE WLC711 CLI Reference Guide...
  • Page 183 The following example creates a guardian scan profile named ffguard_name: WLC.siemens.com :mitigator:gsprof# create ffguard_name delete Use the command to delete a guardian scan profile. The command is accessible from delete delete the mitigator:gsprof context of the CLI. delete guardian scan profile name SCALANCE WLC711 CLI Reference Guide...
  • Page 184 CLI. The following commands are available in the mitigator:maintenance context: • authorized-ap on page 185 • friendly-ap on page 185 • prohibited-ap on page 186 SCALANCE WLC711 CLI Reference Guide...
  • Page 185 The MAC address of the AP. bssid An optional alphanumeric character string identifying the subsystem (SSID). ssid string An optional alphanumeric character string describing the AP. desc string Removes the AP identified by the BSSID from friendly AP status. delete SCALANCE WLC711 CLI Reference Guide...
  • Page 186 APs. APs are identified in this reclassify context by their BSSID (Basic Service Set ID), which is the same as their MAC address. The reclassify command is accessible from the mitigator:maintenance context of the CLI. SCALANCE WLC711 CLI Reference Guide...

  • Page 187: Common Scan Group/Profile Commands

    Every profile must be configured in its own context: scgroup <scan group name> on page 178, scprof <named scan profile> on page 182 or gsprof <named guardian scan profile> on page 184. SCALANCE WLC711 CLI Reference Guide...
  • Page 188 Wireless APs that are part of the scan group or scan aplist profile. Use the no form of the command to delete the Wireless APs from the list. The aplist command is accessible from the mitigator:scgroup:<named scan group> context, the SCALANCE WLC711 CLI Reference Guide...
  • Page 189 CLI. command takes effect after dosa (which removes network access from clients blacklist-timer originating DoS attacks) is enabled. After you run the command, run the command to implement the change. blacklist-timer apply SCALANCE WLC711 CLI Reference Guide...
  • Page 190 Example The following example adds all channels to the scan profile: WLC.siemens.com :mitigator:scprof:scp_name# channels all WLC.siemens.com :mitigator:scprof:scp_name# apply The following example deletes all channels from the scan profile: WLC.siemens.com :mitigator:scprof:scp_name# channels none WLC.siemens.com :mitigator:scprof:scp_name# apply SCALANCE WLC711 CLI Reference Guide...
  • Page 191 This command can be applied only to AP3715s. An AP3715 can concurrently launch countermeasures on all channels it is scanning. As more countermeasures are applied and the number of channels to which they are applied increases, the frequency of countermeasures being applied will decrease. SCALANCE WLC711 CLI Reference Guide...
  • Page 192 (enable | disable) Parameters Enables dropping of frames during a flood attack enable Disables dropping of frames, even during a flood attack disable Example The following example enables frame dropping: WLC.siemens.com :mitigator:scprof:scp_name# drop-faf enable WLC.siemens.com :mitigator:scprof:scp_name# apply SCALANCE WLC711 CLI Reference Guide...
  • Page 193 The following example enables prevention of roaming to external honeypot APs: WLC.siemens.com :mitigator:scprof:scp_name# external-honeypot enable WLC.siemens.com :mitigator:scprof:scp_name# apply internal-honeypot Use the command to enable or disable the preventing of any station from using internal-honeypot an internal honeypot AP. The command is accessible from the internal-honeypot SCALANCE WLC711 CLI Reference Guide...
  • Page 194 CLI and the mitigator:gsprof:<named guardian scan profile> context of the CLI. (Guardian also scans for Rogues). command is only available if security scan is enabled. port port port-number SCALANCE WLC711 CLI Reference Guide...
  • Page 195 CLI. rogue-prevent enable | disable Parameters Enables the prevention of any station from using a rogue AP. enable Disables the prevention of any station from using a rogue AP. disable SCALANCE WLC711 CLI Reference Guide...
  • Page 196 After you run the command, run the command to implement the change. spoofed-ap apply spoofed-ap (enable | disable) Parameters Enables prevention of access to a spoofed AP. enable Disables prevention of access to spoofed APs. disable SCALANCE WLC711 CLI Reference Guide...
  • Page 197 External Honeypot: disable External Friendly: enable Internal Honeypot: disable Spoofed AP: disable Drop Frames FAF: disable Adhoc mode removal: disable DoS attacks removal: enable Blacklisting timer: 900 Concurrent Channel Number: 1 channels 1,3,5 aplist 1000005380080166 SCALANCE WLC711 CLI Reference Guide...

  • Page 198: Chapter 10: Mobility Commands

    IP address for the backup manager in the backupmanagerip mobility zone. The role of the Wireleses Appliance must be set to Agent before this option becomes available (see mrole on page 199 for more information). backupmanagerip IP Address SCALANCE WLC711 CLI Reference Guide...

  • Page 199: Mrole

    Example code is not currently available. mheartbeat The Wireless Appliance that has the VNManager designation sends regular Heartbeat messages containing information regarding wireless device session changes to the VNAgents, and waits for an update message to come back. SCALANCE WLC711 CLI Reference Guide...

  • Page 200: Slpreg

    The role of the Wireless Appliance must be set to Manager before this option becomes available. For more information, see mrole on page 199. agent (add|remove|approve|backupMgr) IP Address Parameters Adds an agent to the network Removes an agent from the network remove Approves an agent on the network approve SCALANCE WLC711 CLI Reference Guide...

  • Page 201: Secmode

    The following example configures the security mode to have no restrictions, allowing all agents to connect to the manager: WLC.siemens.com :mobility# secmode none mdismethod Use the command to locate the Mobility Manager on the network. mdismethod mdismethod (slpd|static) SCALANCE WLC711 CLI Reference Guide...

  • Page 202: Mmanagerip

    Appliance must be set to Agent before this option becomes available. For more information, see backupmanagerip on page 198. mmanagerip IP Address Parameters Specifies the IP address of the VN Manager IP Address Examples The following example changes the IP address of the Mobility Manager: WLC.siemens.com :mobility# mmanagerip 195.160.1.39 SCALANCE WLC711 CLI Reference Guide...

  • Page 203: Chapter 11: Schedule_Backup Commands

    • freq on page 204 • password on page 205 • protocol on page 206 • server on page 206 • starttime on page 206 • type on page 207 • user on page 207 SCALANCE WLC711 CLI Reference Guide...

  • Page 204: Destination

    (daily |everyday|weekday)|(weekly 0,1,2,3,4,5,6)|(monthly date)|never Parameters Indicates that backups will occur on a daily basis daily Configures backup to occur every day of the week everyday SCALANCE WLC711 CLI Reference Guide...

  • Page 205: Password

    The user name must be specified using the command. For more information, see user on page user 207. password string Parameters Specifies a password for a user on the FTP or SCP server string SCALANCE WLC711 CLI Reference Guide...

  • Page 206: Protocol

    The scheduled starttime task time must be set to daily, weekly, or monthly before the start time can be specified. For more information, see freq on page 204. starttime HH:mm SCALANCE WLC711 CLI Reference Guide...

  • Page 207: Type

    The following example indicates that audit files are to be backed up: WLC.siemens.com :schedule_backup# type audit user Use the command to specify the user name of an account on the FTP or SCP server. user Syntax user id Parameters Specifies a user name SCALANCE WLC711 CLI Reference Guide...
  • Page 208 Commands user Examples The following example specifies a username for the server: WLC.siemens.com :schedule_backup# user admin SCALANCE WLC711 CLI Reference Guide...

  • Page 209: Chapter 12: Schedule_Upgrade Commands

    Wireless Appliance The new software’s file name image name Specifies that the new software will be downloaded from the remote remote FTP server The remote FTP server where the image file is located server SCALANCE WLC711 CLI Reference Guide...

  • Page 210: Upgrade_Backup

    Wireless Appliance is to be saved on the flash card. This option is only available if an external flash card has been mounted on the controller. Backup file name can optionally be provided, but it must end with "- rescue-user.tgz". SCALANCE WLC711 CLI Reference Guide...
  • Page 211 :schedule_upgrade# upgrade_backup remote 192.168.4.181 admin abc123/ myDir/ backup-rescue-user.tgz In the following example, the backup image is created on the external flash: WLC.siemens.com :schedule_upgrade# upgrade_backup flash backupToFlash-rescue- user.tgz The following example deletes the upgrade backup: WLC.siemens.com :schedule_upgrade# no upgrade_backup SCALANCE WLC711 CLI Reference Guide...

  • Page 212: Chapter 13: Snmp Commands

    • trap-manager-v3 on page 218 • user on page 218 • show on page 217 • rwcommunity on page 216 • port on page 215 • publish-ap on page 215 • show on page 217 SCALANCE WLC711 CLI Reference Guide...

  • Page 213: Contact

    Enables either SNMPv1/V2 or SNMPv3 Specifies the name of the SNMP administrator contact Specifies a description for the location of the SNMP administration machine location Specifies a name for the read-only network management community rcommunity SCALANCE WLC711 CLI Reference Guide...

  • Page 214: Engine-Id

    All users will be reset. (yes/no):no Warning : Operation to update engine ID cancelled. location Use the command to enter a descriptive string indicating the physical location of the location Wireless Appliance running the SNMP agent. location string SCALANCE WLC711 CLI Reference Guide...

  • Page 215: Port

    If you attempt to enable SNMP publish when LLDP is enabled on one or more APs, you will get the following warning: WARNING: LLDP is enabled for some Wireless APs. Would you like to continue? (C) Cancel (P) Proceed (O) Disable LLDP and proceed SCALANCE WLC711 CLI Reference Guide...

  • Page 216: Rcommunity

    Wireless Appliance to send SNMP traps of the specified severity severity level. severity (1|2|3|4|5) Parameters Forwards the SNMP trap with the Critical severity level Forwards the SNMP trap with the Major severity level SCALANCE WLC711 CLI Reference Guide...

  • Page 217: Show

    Identifies the primary or secondary machine monitoring SNMPv1/v2 traps Specifies the IP address of the machine monitoring SNMPv1/v2 traps. The IP IP Address address can be either IPv4 (A.B.C.D) or IPv6 (A:B:C:D:E:F:G:H) format. Delete the specified trap manager. delete SCALANCE WLC711 CLI Reference Guide...

  • Page 218: Trap-Manager-V3

    :snmp# trap-manager-v3 1 delete user Use the command to configure SNMP v3 users and security. user user username security (noAuthNoPriv | authNoPriv (md5|sha) authpassword | authPriv (md5|sha) authpassword des privpassword) user username disable|enable user username delete SCALANCE WLC711 CLI Reference Guide...
  • Page 219 The following example creates an SNMPv3 user named “test” with an authPriv security level using MD5, an authentication password of “tester1234” and a privacy password of “tester1234”: WLC.siemens.com # user test security authPriv md5 tester1234 des test1234 SCALANCE WLC711 CLI Reference Guide...

  • Page 220: Chapter 14: Syslog Commands

    Use the no form of the command to disable audmsg them. audmsg no audmsg Parameters None Example The following example enables service messages on the Wireless Appliance: WLC.siemens.com :syslog# audmsg SCALANCE WLC711 CLI Reference Guide...

  • Page 221: Facility

    Successfully updated station logs to 2. stationevents Use the command to turn on or off station event forwarding to the syslog server. stationevents stationevents enable|disable Parameters Enables station event logging. enable Disables tation event logging. disable SCALANCE WLC711 CLI Reference Guide...

  • Page 222: Svcmsg

    Specifies the index number of the system log ID Specifies the IP address to be configured. The IP address can be either IPv4 IP Address (A.B.C.D) or IPv6 (A:B:C:D:E:F:G:H) format. Enables the server enable Disables the server disable SCALANCE WLC711 CLI Reference Guide...
  • Page 223 The following example specifies the IP address of a syslog server and enables it: WLC.siemens.com :syslog# syslogip 1 143.23.34.52 enable Successfully updated syslogip 1. The following example deletes the syslog server: WLC.siemens.com :syslog# no syslogip 1 Successfully removed syslogip 1. SCALANCE WLC711 CLI Reference Guide...

  • Page 224: Chapter 15: Time Commands

    The Network Time Protocol must be disabled before this command can be used. For more information, on page 225. After you run the command, run the apply command to implement the changes. clock clock hh:mm Parameters Specifies the current hour (in 24 hour clock format) Specifies the current minute SCALANCE WLC711 CLI Reference Guide...

  • Page 225: Date

    Specifies to use the external NTP Server to synchronize the network time Specifies to use the internal NTP Server to synchronize the network time Example The following example specifies to use the internal NTP Server to synchronize the network time: WLC.siemens.com :time# ntp 3 SCALANCE WLC711 CLI Reference Guide...

  • Page 226: Ntpip

    Parameters Specifies the continent continent Specifies the country country Specifies the region region Example The following example sets the time zone information: WLC.siemens.com :time# tz continent america country united states region new_york SCALANCE WLC711 CLI Reference Guide...

  • Page 227: Chapter 16: Traffic_Capture Commands

    TCPDump, the CLI gives a default name mgmt_traffic_dump.cap. The CLI enforces .cap file extension to the TCPDump file. The command is accessible from the traffic_capture file_name context of the CLI. file_name fileName SCALANCE WLC711 CLI Reference Guide...

  • Page 228: Size

    Parameters The interface name on which the exception traffic is to be captured. You interfacename can choose any of the following interfaces: • Management Port (eth0) • Physical esa ports • Defined VNS SCALANCE WLC711 CLI Reference Guide...

  • Page 229: Delete

    You can save only one TCPDump file on the local drive. list Parameters None Example The following example displays the list of TCPDump file capture: WLC.siemens.com :traffic_capture# list Traffic Capture Files: SCALANCE WLC711 CLI Reference Guide...

  • Page 230: Start

    The stop command is accessible from the traffic_capture context of the CLI. stop stop Parameters None Example The following example specifies to stop capturing the exception traffic: WLC.siemens.com :traffic_capture# stop SCALANCE WLC711 CLI Reference Guide...

  • Page 231: Show

    CLI. show interfaces Parameters None Example Example code is not currently available. SCALANCE WLC711 CLI Reference Guide...

  • Page 232: Chapter 17: Users Commands

    GUI. Sets account type to readonly readonly Examples The following example creates the read-only user account “abby” on the system: WLC.siemens.com :users# id abby readonly Please input password: Please confirm password: Successfully created user abby. SCALANCE WLC711 CLI Reference Guide...

  • Page 233: Pwd

    Parameters Specifies the name of the account userid Examples The following example changes the password for the account named “fred”: WLC.siemens.com :users# pwd fred Please input new password: Please confirm new password: SCALANCE WLC711 CLI Reference Guide...

  • Page 234: Chapter 18: Vns Commands (Vnsmode)

    QoS (Quality of Service) settings. This context contains global admission control commands to configure flexible client access, egress filtering, and to control the amount of bandwidth for voice and video applications on Wireless APs. The following commands are available in the vnsmode:adminctr context: SCALANCE WLC711 CLI Reference Guide...
  • Page 235 WLC.siemens.com :vnsmode:adminctr# auto-login drop egress-filtering Use the command to enable or disable egress filtering globally. The egress-filtering egress- command is accessible from the vnsmode::adminctr context of the CLI. filtering egress-filtering on | off | wlan SCALANCE WLC711 CLI Reference Guide...
  • Page 236 RFC 3580 options. This mode enables the controller to hybrid-policy use both a VLAN ID in the tunnel attributes and a filter ID to select policy for a station. This command is available in the vnsmode:adminctr context. hybrid-policy policy | vlan | combined SCALANCE WLC711 CLI Reference Guide...
  • Page 237 The command is accessible from the max-beffort-reassoc vnsmode:adminctr context of the CLI. max-beffort-reassoc 1 - 100 Parameters Specifies the percentage configured for the Maximum Best Effor (BE) BW for 1 - 100 roaming streams. SCALANCE WLC711 CLI Reference Guide...
  • Page 238 AP max-video-assoc when an already associated client requests admission for a new video stream. After you run the command, run the command to implement the changes. max-video-assoc apply SCALANCE WLC711 CLI Reference Guide...
  • Page 239 After you run the command, run the command to implement the changes. max-voice-assoc apply max-voice-assoc 0-100 Parameters Specifies the maximum allowable bandwidth as a percentage of total bandwidth. 0-100 SCALANCE WLC711 CLI Reference Guide...
  • Page 240 The following example sets policy-invalid-action behavior to deny: WLC.siemens.com :vnsmode:adminctr# policy-invalid-action deny tg-selection Use the command to configure the topology group selection algorithm. The tg-selection command is accessible from the vnsmode:adminctr context of the CLI. selection SCALANCE WLC711 CLI Reference Guide...

  • Page 241: Create

    After you create a VNS with this command, you can configure additional parameters in the vnsmode:<named-VNS> context. Refer to <named-VNS> on page 264 for more information. After you run the command, run the command to implement the changes. create apply create vns name wlans WLANS name pol role-name SCALANCE WLC711 CLI Reference Guide...

  • Page 242: Das

    DAS port. The command is available from the port port vnsmode:das context. port 1024-65535 Parameters Specifies the DAS port. 1024-65535 Examples The following example sets the DAS port number to 3799: WLC.siemens.com :vnsmode:das# port 3799 SCALANCE WLC711 CLI Reference Guide...

  • Page 243: Default-Role

    245 — See for commands in the vnsmode:default-role:apfilters context. show Use the command to display the default-role configuration information for the current show vnsmode:default-role context. The command is accessible from within the vnsmode:default-role show context. SCALANCE WLC711 CLI Reference Guide...
  • Page 244 Egress rate profile: Unlimited Enable AP filtering: disable Synchronize: enable WLC.siemens.com :vnsmode:default-role# topology-name Use the command to associate an already existing topology with a role. The topology-name command is accessible from the vnsmode:default-role context. topology-name SCALANCE WLC711 CLI Reference Guide...
  • Page 245 AP custom filters are configured for role applied at the AP. The command is apfilters accessible from the vnsmode:default-role context. This command is not visible in the CLI if you execute the command. apcustom disable SCALANCE WLC711 CLI Reference Guide...

  • Page 246: Delete

    NAC server configuration, you can further configure it by entering the vnsmode:nac:<named- NAC-server> context. See radius on page 249. create name A.B.C.D Parameters Specifies the name of the NAC server name Specifies the IP address of the NAC server A.B.C.D SCALANCE WLC711 CLI Reference Guide...
  • Page 247 CLI. show [NAC_server] Parameters Specifies to display information about the specific NAC server NAC_server Examples The following example displays a list of NAC server configuration information: WLC.siemens.com :vnsmode:nac# show NAC Name IP Address test1 192.168.3.11 SCALANCE WLC711 CLI Reference Guide...

  • Page 248: Netflow-Mirror

    Parameters Specifies the NetFlow export interval in seconds from 30 - 360. The default is 60 seconds seconds. Example The following example sets the NetFlow export interval to 50 seconds: WLC.siemens.com :vnsmode:netflow-mirror# netflow-export-interval 50 SCALANCE WLC711 CLI Reference Guide...

  • Page 249: Radius

    • create on page 250 • defer-acct-start on page 250 • delay-client-msg on page 251 • delete on page 251 • include-service-type on page 252 • polling-interval on page 252 • polling-mechanism on page 252 SCALANCE WLC711 CLI Reference Guide...
  • Page 250 Name: test-radius-server defer-acct-start Use the command to enable or disable defering sending the accounting start defer-acct-start request until the client's IP address is known. The command is accessible from the defer-acct-start vnsmode:radius context of the CLI. SCALANCE WLC711 CLI Reference Guide...
  • Page 251 Use the command to delete a RADIUS server configuration. The command is accessible delete delete from the vnsmode:radius context of the CLI. delete RADIUS_server Parameters Specifies the name of the RADIUS server to delete RADIUS_server SCALANCE WLC711 CLI Reference Guide...
  • Page 252 This example sets the RADIUS server polling-interval to 43: WLC.siemens.com :vnsmode:radius:<named_RADIUS_server># polling-interval 43 polling-mechanism Use this command to configure the RADIUS server polling mechanism. This command is available from the vnsmode:radius:<RADIUS_server> context. polling-mechanism (actual-user | rfc5997) SCALANCE WLC711 CLI Reference Guide...
  • Page 253 Authentication total number of tries: 3 Accounting total number of tries: 3 Authentication RADIUS request timeout: 5 Accounting RADIUS request timeout: 5 Interim accounting interval: 30 Default protocol: PAP Shared secret: ********** Name: RADIUS_1 Radius IP: 192.0.1.202 SCALANCE WLC711 CLI Reference Guide...
  • Page 254 Specifies a MAC address format of xx:xx:xx:xx:xx:xx for use with the RADIUS server Specifies a MAC address format of xx-xx-xx-xx-xx-xx for use with the RADIUS server Specifies a MAC address format of xxxx.xxxx.xxxx for use with the RADIUS server SCALANCE WLC711 CLI Reference Guide...
  • Page 255 Service-Type attribute to Login. The default service type is Framed. Setting the Service-Type to Login conflicts with the controller administrative RADIUS login since the administrative login also sets the Service-Type to Login. If administrative RADIUS login is enabled, Service-Type set to Login will be blocked and vice versa. SCALANCE WLC711 CLI Reference Guide...
  • Page 256 <named_RADIUS_server> refers to the name of a <named_RADIUS_server> given RADIUS server, is available in the vnsmode:radius context. When executed, it moves you into the vnsmode:radius:<named_ RADIUS_server> context, which contains commands to configure the settings of the specified individual RADIUS server. SCALANCE WLC711 CLI Reference Guide...
  • Page 257 RADIUS accounting. The command is acct-prio acct-prio accessible from the vnsmode:radius:<named_RADIUS _server> context of the CLI. acct-prio integer Parameters Specifies the RADIUS accounting priority. Possible values can be any integer 0 or integer greater. SCALANCE WLC711 CLI Reference Guide...
  • Page 258 RADIUS authentication. The command auth-port auth-port is accessible from the vnsmode:radius:<named_ RADIUS_server> context of the CLI. If you do not change the authentication port number with this command, the controller uses the default port 1812. auth-port 0-65535 SCALANCE WLC711 CLI Reference Guide...
  • Page 259 The following example sets the number of RADIUS authentication attempts to 5 for the RADIUS server named RAD1: WLC.siemens.com :vnsmode:radius:RAD1# auth-retries 5 auth-timeout Use the command to set the timeout for RADIUS authentication. The auth-timeout auth-timeout command is accessible from the vnsmode:radius:<named_ RADIUS_server> context of the CLI. SCALANCE WLC711 CLI Reference Guide...
  • Page 260 Use the command to set the RADIUS interim accounting interval. The command is interim interim accessible from the vnsmode:radius:<named_RADIUS_server> context of the CLI. interim 0-360 Parameters Specifies the RADIUS interim accounting interval in seconds. 0-360 SCALANCE WLC711 CLI Reference Guide...
  • Page 261 :vnsmode:radius:RAD1# show name Name: RAD2 protocol Use the command to set the security protocol used with the RADIUS server. The protocol protocol command is accessible from the vnsmode:radius: <named_RADIUS_server> context of the CLI. protocol [CHAP|MS-CHAP|MS-CHAP2|PAP] SCALANCE WLC711 CLI Reference Guide...

  • Page 262: Rateprofile

    In the vnsmode:rateprofile context, use the command to delete a bandwidth rate control profile, and use the command to display existing rate control profiles. show After you run the command, run the command to implement the changes. create apply SCALANCE WLC711 CLI Reference Guide...
  • Page 263 :vnsmode:rateprofile# delete lowspeed show Use the command to display all existing bandwidth rate control profiles or a specific profile. show show [profile_name] Parameters Specifies the name of a specific rate control profile to display. profile_name SCALANCE WLC711 CLI Reference Guide...

  • Page 264: Named-Vns

    That is — if the VNS’s WLAN Service has a mode of: • “std” then the referenced role must have a topology of mode “b@ap,” “b@ac,” or “routed” • “3pap” then the referenced role must have a physical topology mode SCALANCE WLC711 CLI Reference Guide...
  • Page 265 :vnsmode:VNS1# apply name Use the command in the vnsmode:<named-VNS> context to change the name of the current name VNS. After you run the command, run the command to implement the changes. name apply name VNS-name SCALANCE WLC711 CLI Reference Guide...
  • Page 266 VNS across paired controllers. Refer to the Wireless User Guide for more information about synchronization of VNSs. After you run the command, run the command to implement the changes. sync apply sync (enable | disable) SCALANCE WLC711 CLI Reference Guide...
  • Page 267 This example changes the associated WLAN Service to wlan4 for the VNS named VNS1: WLC.siemens.com :vnsmode:VNS1# wlans-name wlan4 WLC.siemens.com :vnsmode:VNS1# apply show Use the command in the vnsmode:<named-VNS> context to display information about the show current VNS. show Parameters None. SCALANCE WLC711 CLI Reference Guide...

  • Page 268: Common Filter Configuration Commands

    - Authentication Header protocol • esp - Encapsulating Security Payload protocol • any- Any protocol • icmp - ICMP protocol • gre - Generic Route Encapsulation protocol • 0-255 - number value of protocol SCALANCE WLC711 CLI Reference Guide...
  • Page 269 Specifies the type of service in the filter rule. Valid values are 0-FF for ToS/DSCP value/mask value | and FF|FE|FC|F8|F0|E0|C0|80 for mask. Specifying none means tos/dscp value is not used as matching criteria in the filter rule. none) SCALANCE WLC711 CLI Reference Guide...
  • Page 270 2 proto udp 192.168.10.0 255.255.255.0 port 10 2000 in dst out src allow filter 3 (default) proto none 0.0.0.0 all_ports in dst out none allow filter 4 (default) proto none 0.0.0.0 all_ports in none out src allow SCALANCE WLC711 CLI Reference Guide...
  • Page 271 The first <port> value specifies either the port or the start of a port range. The second <port> value optionally specifies the end of a range. This parameter is valid only when either TCP or UDP is the specified protocol. Valid port values are from 0 - 65535. SCALANCE WLC711 CLI Reference Guide...
  • Page 272 The following example overwrites a pre-existing filter rule 1 with a rule that allows ICMP traffic types 9 through 31 in both directions for the associated topology’s interface subnet and mask: WLC.siemens.com :vnsmode:p1:acfilters# config 1 proto icmp interface-subnet type 9 31 in dst out src allow SCALANCE WLC711 CLI Reference Guide...
  • Page 273 Specifies the current (source) position in the filter list of the rule to be moved, src-pos dest-pos followed by the new (destination) list position for the filter rule. Valid values are 0 -255. List position 1 is top priority. SCALANCE WLC711 CLI Reference Guide...
  • Page 274 Enable AP filtering: disable filter 1 proto udp 192.168.10.0 255.255.255.0 port 10 2000 both allow filter 2 proto tcp 192.168.10.0 255.255.255.0 port 10 2000 both allow filter 3 (default) proto none 0.0.0.0 all_ports both deny WLC.siemens.com :vnsmode:p1:acfilters# SCALANCE WLC711 CLI Reference Guide...

  • Page 275: Chapter 19: Wlans Commands

    302. The following commands are available in the wlan:clients context. • client on page 276 • descr on page 276 • enable on page 277 • endofday on page 277 • export_clients on page 278 SCALANCE WLC711 CLI Reference Guide...
  • Page 276 Specifies the ID of the guest access account and must begin with the string “Guest-” Specifies the description for the guest client descriptive_text Examples The following example sets a description for the client guest access account with ID “Guest-lobby”: WLC.siemens.com :wlans:clients# descr Guest-lobby The lobby guest client account. SCALANCE WLC711 CLI Reference Guide...
  • Page 277 [no] endofday id HH:MM Parameters Specifies the ID of the guest access account and must begin with the string “Guest-” Specifies the duration of the guest client in a <HH:MM> hours and minutes format HH:MM SCALANCE WLC711 CLI Reference Guide...
  • Page 278 Specifies the IP address of an FTP server to import the file from server Specifies the username with which to login in to the FTP server user Specifies the directory path containing the clients import file Specifies the clients import file name file SCALANCE WLC711 CLI Reference Guide...

  • Page 279: Create

    CLI. create WLANS-name mode (mesh|wds|std|3pap|remote) ssid ssid-string Parameters Specifies the name of the WLAN service WLANS-name Specifies the mode of the WLAN service mode (mesh|wds|std|3pap| remote) Specifies the SSID of the WLAN service sid ssid-string SCALANCE WLC711 CLI Reference Guide...

  • Page 280: Delete

    SSIDs within the Wireless Appliance's remote-ssid mobility domain. remote-ssid Parameters None. Usage command reports the remote SSIDs only if the command is set to remote-ssid remoteable enable. For more information, see remoteable on page 331. SCALANCE WLC711 CLI Reference Guide...

  • Page 281: Show

    314 • direct-client-traffic on page 315 • egress-filtering on page 315 • name on page 316 • priv on page 317 — See for commands in the wlan:<WLAN-service-name>:priv context. • on page 322 SCALANCE WLC711 CLI Reference Guide...
  • Page 282 Use the command to add or remove an AP to or from the WLAN service configuration. The aplist command is accessible from the wlan:<WLAN-service-name> context of the CLI when the aplist WLAN service type is standard. SCALANCE WLC711 CLI Reference Guide...
  • Page 283 After you run the command, run the command to implement the changes. aplist-wds apply aplist-wds ap-name ((radio1 none|child|parent|both radio2 none|child|parent| both)|(both none|child|parent|both)) [pref-parent ap-name | Any-Parent] [backup- parent ap-name | Any-Parent] [wkgbridge on|off] no aplist-wds ap-name radio1|radio2|both SCALANCE WLC711 CLI Reference Guide...
  • Page 284 (equivalent to parent in static mesh WLANs).mesh = the AP is a mesh AP. wkgbridge (on|off) Configures the work group bridging For a dual-band radio AP, if more than one available radio matches the backhaul radio1|radio2 radio settings, select one of the radios for backhaul. SCALANCE WLC711 CLI Reference Guide...
  • Page 285 • config exit on page 297 • fast-failover on page 298 • include-cui-type on page 298 • interim on page 299 • on page 299 • mac-acct on page 300 • mac-auto-authenticate on page 300 SCALANCE WLC711 CLI Reference Guide...
  • Page 286 :wlans:cnl-AAA:auth# apply access-reject-without-cui Use the command to enable or disable treatment of Access-Accept access-reject-without-cui without Chargeable-User-Identity attribute as Access-Reject. The access-reject-without-cui command is accessible from the wlans -> <named wlans> -> auth context of the CLI. SCALANCE WLC711 CLI Reference Guide...
  • Page 287 • guestportalprefix on page 292 • maxsessionlifetime on page 293 • minpasswdlength on page 293 • redirect on page 294 • send-login on page 294 • set-acct-lifetime on page 295 • tos-override on page 295 SCALANCE WLC711 CLI Reference Guide...
  • Page 288 302. mode cp-ssl enable|disable Parameters Enable HTTPS support on the WLAN service configured for external enable authentication. Disable HTTPS support on the WLAN service configured for external disable authentication. SCALANCE WLC711 CLI Reference Guide...
  • Page 289 IP address and the server access port on the Wireless Appliance for communication with an external authentication server. After you run the command, run the command to implement the changes. extcpip apply extcpip A.B.C.D:port Parameters SCALANCE WLC711 CLI Reference Guide...
  • Page 290 Shared Secret password common to both the Wireless Appliance and the external web server. After you run the command, run the command to implement the changes. extsecret apply SCALANCE WLC711 CLI Reference Guide...
  • Page 291 Use the command, within context wlan:<WLAN-service- guestportalacctlifetime name>:auth:captiveportal, to configure the lifetime for the guest portal access account, in days. After you run the command, run the command to implement the guestportalacctlifetime apply changes. SCALANCE WLC711 CLI Reference Guide...
  • Page 292 The guestportal authentication mode must be set for this command to be available. For more information, see mode on page 302. Example The following example sets the guest portal prefix to the string “TEST”: WLC.siemens.com :wlans:CNL-CP:auth:captiveportal# guestportalprefix TEST WLC.siemens.com :wlans:CNL-CP:auth:captiveportal# apply WLC.siemens.com :wlans:CNL-CP:auth:captiveportal# show guestportalprefix guestportalprefix TEST SCALANCE WLC711 CLI Reference Guide...
  • Page 293 Specifies the minimum acceptable character length for the guest portal access length account password. Length can range from 1 to 32 characters. Usage The guestportal authentication mode must be set for this command to be available. For more information, see mode on page 302. SCALANCE WLC711 CLI Reference Guide...
  • Page 294 Use the original destination value configured by the Wireless Assistant GUI. original-dest Use the captive portal session page value configured by the Wireless Assistant GUI. cp-session Use the custom specific URL value configured by the Wireless Assistant GUI. custom SCALANCE WLC711 CLI Reference Guide...
  • Page 295 (enable tos HH) | disable Parameters Enables ToS override enable tos Specifies a hexidecimal value for ToS override. For the NAC integration, this should be 40 (0x40) Disables ToS override disable Usage SCALANCE WLC711 CLI Reference Guide...
  • Page 296 CLI. Use this command to configure the RADIUS server as an accounting, authentication or MAC authentication server. config (radius (role acct|auth|mac) [prot CHAP | PAP | MS-CHAP | MS-CHAP2]) SCALANCE WLC711 CLI Reference Guide...
  • Page 297 CLI. config exit Parameters None Usage Using the command from within the RADIUS server configuration command mode exits config exit the wlans:<WLAN-service-name>:auth RADIUS server configuration context and places you in the wlans:<WLAN-service-name>:auth context. SCALANCE WLC711 CLI Reference Guide...
  • Page 298 -> <named wlans> -> auth context of the CLI. include-cui-type (enable | disable) Parameters Enables the Chargeable-User-Identity attribute in Access-Request message. enable Disables the Chargeable-User-Identity attribute in Access-Request message. disable SCALANCE WLC711 CLI Reference Guide...
  • Page 299 For more information, see mode on page 302. Example The following example enables MAC authentication for the test WLANS: WLC.siemens.com :wlans:test:auth# mac enable WLC.siemens.com :wlans:test:auth# show mac MAC based authorization: enable SCALANCE WLC711 CLI Reference Guide...
  • Page 300 MAC authentication mac-auto-authenticate is enabled, using the command. For authentication command information, see mode mac enable mode on page 302. For command information, see on page 299. SCALANCE WLC711 CLI Reference Guide...
  • Page 301 | on-roam | area-change Parameters Specify MAC authentication on roam as disabled. Default value: none. none Specify Mac authentication on roam as enabled. on-roam Specify Mac authentication on roam as allowing area change. area-change SCALANCE WLC711 CLI Reference Guide...
  • Page 302 Enable or disable adding User's MAC address to redirection URL. add-mac Enable or disable adding currently assigned role to redirection URL. add-role Enable or disable adding signature to redirection URL. add-sign Enable or disable adding timestamp request received by controller to redirection URL. add-time SCALANCE WLC711 CLI Reference Guide...
  • Page 303 1 - 32. Usage You must be in RADIUS server configuration mode for the command to be available. Use the move command to enter RADIUS server configuration mode. For more information, see config config page 296. SCALANCE WLC711 CLI Reference Guide...
  • Page 304 NAS IP address to be used with the RADIUS server being nasip configured. The command is accessible from the wlans:<WLAN-service-name>:auth context of nasip the CLI. After you run the command, run the command to implement the changes. nasip apply nasip A.B.C.D | vnsip SCALANCE WLC711 CLI Reference Guide...
  • Page 305 Use the password command to enter RADIUS server configuration mode. For more information, see config config page 296. Example The following example sets the MAC authentication password to techdoc: WLC.siemens.com :wlans:cnl-AAA:auth# password techdoc WLC.siemens.com :wlans:cnl-AAA:auth# apply SCALANCE WLC711 CLI Reference Guide...
  • Page 306 Specifies the name of the policy to apply when an authentication request times policy name out. Specifies that the authentication request be treated as an authentication failure treat-like-access- when the authentication request times out. This is the default. reject SCALANCE WLC711 CLI Reference Guide...
  • Page 307 Use VNS name acct Use VNS IP address Use VNS name MAC-based authorization: disable Authentication mode: 8021x AP as VSA attribute: enable SSID as VSA attribute: enable VNS as VSA attribute: enable Policy as VSA attribute: enable SCALANCE WLC711 CLI Reference Guide...
  • Page 308 When the vsa-ap authentication mode is disabled, MAC must be enabled for this command to be available. For more information, see mode on page 302. SCALANCE WLC711 CLI Reference Guide...
  • Page 309 RADIUS server. The command is accessible from the wlan:<WLAN-service-name>:auth vsa-ingress context of the CLI. After you run this command, run the command to implement the changes. apply vsa-ingress enable | disable SCALANCE WLC711 CLI Reference Guide...
  • Page 310 302. Example The following example enables the inclusion of policy information in the message to the RADIUS server: WLC.siemens.com :wlans:test:auth# vsa-policy enable WLC.siemens.com :wlans:test:auth# apply WLC.siemens.com :wlans:test:auth# show vsa-policy Policy as VSA attribute: enable SCALANCE WLC711 CLI Reference Guide...
  • Page 311 When the vsa-topology authentication mode is disabled, MAC must be enabled for this command to be available. For more information, see mode on page 302. SCALANCE WLC711 CLI Reference Guide...
  • Page 312 Use this command to configure the backhaul radio band for a dynamic mesh WLAN service. The command is accessible from the wlans:<WLAN-service-name> context of the CLI for backhaul-radio dynamic mesh type WLAN services. backhaul-radio a|bg Parameters Select the 5 GHz radio band Select the 2.4 GHz radio band SCALANCE WLC711 CLI Reference Guide...
  • Page 313 For information about Class of Service, refer to cos Commands on page 384. default-cos named-cos | none Parameters Specify a named-cos to assign to the WLAN service as a default CoS. named-cos unassign the default CoS from the WLAN service none SCALANCE WLC711 CLI Reference Guide...
  • Page 314 Configures the default traffic mirror for prohibited, enabled in both directions, or in-both-directions | enabled in the in direction only. enable-in-direction- only Example The following example configures the default traffic mirror to be enabled in both directions: WLC.siemens.com :wlans:HT_BR# default-traffic-mirror enable-both-directions SCALANCE WLC711 CLI Reference Guide...
  • Page 315 Enables filtering on this WLAN service. enable Disables filtering on this WLAN service. disable Example The following example enables filtering on the test WLAN: WLC.siemens.com :wlans:test# egress-filtering enable WLC.siemens.com :wlans:test# apply WLC.siemens.com :wlans:test# show Egress Filtering: enable SCALANCE WLC711 CLI Reference Guide...
  • Page 316 NetFlow on the named WLAN. The netflow netflow command is accessible from the wlans:<named-wlan> context of the CLI. netflow (enable | disable) Parameters enable | disable Enables or disables NetFlow on the named WLAN. SCALANCE WLC711 CLI Reference Guide...
  • Page 317 CLI when the WLAN service type is STD. group-key-ps enable | disable Parameters Specify to enable the group key power save retry. enable Specify to disable the group key power save retry. disable SCALANCE WLC711 CLI Reference Guide...
  • Page 318 Once you have set the privacy mode, new commands become available in the wlan:<WLAN-service- name>:priv context. For example, setting the privacy mode to wep provides an additional command (wep on page 319) that you can use to configure WEP settings. SCALANCE WLC711 CLI Reference Guide...
  • Page 319 The wpa-broadcast-rekey wpa- command is accessible from the wlan:<WLAN-service-name>:priv context of the broadcast-rekey CLI. After you run the command, run the command to implement the name wpa-broadcast-rekey apply change. wpa-broadcast-rekey none | 30-86400 SCALANCE WLC711 CLI Reference Guide...
  • Page 320 :wlans:test:priv# wpa-v1 tkip WLC.siemens.com :wlans:test:priv# apply WLC.siemens.com :wlans:test:priv# show wpa-v1 WPA v.1 encryption: wpa-v2 Use the command to configure the WPA v2 encryption protocol. The command is wpa-v2 wpa-v2 accessible from the wlan:<WLAN-service-name>:priv context of the CLI. SCALANCE WLC711 CLI Reference Guide...
  • Page 321 For more information, see mode page 318. Example The following example sets WPA v2 key management to both pre-authorization and Opportunistic Key Caching (OKC): WLC.siemens.com :wlans:test:priv# wpa-v2-key-mgmt both WLC.siemens.com :wlans:test:priv# apply SCALANCE WLC711 CLI Reference Guide...
  • Page 322 QoS support options for the WLAN service. The following commands are available in the wlan:<WLAN-service-name>:qos_policy context. • dot11e on page 324 • downlink on page 324 • flex-client-access on page 325 • legacy on page 325 SCALANCE WLC711 CLI Reference Guide...
  • Page 323 (enable | disable) Parameters Enables Global Admission Control for Background (BK). enable Disables Global Admission Control for Background (BK). disable Examples The following example enables Global Admission Control for Background (BK): WLC.siemens.com :wlans:v1WLAN:qos-policy# bground-admission-control enable SCALANCE WLC711 CLI Reference Guide...
  • Page 324 Data transmissions will continue and no action is taken against the violating transmissions. Example The following example defines the QoS downlink policy to drop the transmission’s data packets when a TSPEC violation is discovered: WLC.siemens.com :wlans:CNL-7-CP:qos-policy# downlink drop WLC.siemens.com :wlans:CNL-7-CP:qos-policy# apply SCALANCE WLC711 CLI Reference Guide...
  • Page 325 Legacy Wireless QoS support cannot be re-enabled once it has been disabled. Example The following example enables the legacy solution for the VNS: WLC.siemens.com :wlans:CNL-7-CP:qos-policy# legacy enable WLC.siemens.com :wlans:CNL-7-CP:qos-policy# apply WLC.siemens.com :wlans:CNL-7-CP:qos-policy# show legacy Legacy: enable SCALANCE WLC711 CLI Reference Guide...
  • Page 326 | disable Parameters enable | disable Enables or disables priority override for all packets in the WLANS. Example The following example overrides priority for all packets on WLANS CNL-7-CP: WLC.siemens.com :wlans:CNL-7-CP:qos-policy# priority-override enable WLC.siemens.com :wlans:CNL-7-CP:qos-policy# apply SCALANCE WLC711 CLI Reference Guide...
  • Page 327 0-7 Parameters Specifies a Service Class value. Default value: 1. Usage This command is only active if the command has been enabled. For more priority-override information, see priority-override on page 326. SCALANCE WLC711 CLI Reference Guide...
  • Page 328 | disable Enables or disables U-APSD. Default value: disabled. Usage This command is only available when either the 802.11e or commands have been enabled. For more information see dot11e on page 324 and on page 329. SCALANCE WLC711 CLI Reference Guide...
  • Page 329 CLI. After you run the command, run the command to implement the changes. apply wmm enable | disable Parameters enable | disable Enables or disables Wi-Fi Multimedia enhancements on the WLANS. SCALANCE WLC711 CLI Reference Guide...
  • Page 330 CLI. After you run the command, run the command to implement the voice-admission-control apply changes. voice-admission-control enable | disable Parameters enable | disable Enables or disables global admission control for voice for WLANS. SCALANCE WLC711 CLI Reference Guide...
  • Page 331 The following commands are available in the wlan:<WLAN-service-name>:rf context. • 11h-power-reduction on page 332 • 11h-support on page 332 • 11k-beacon-rep • 11k-quiet-ie • 11k-support • energy-save-mode on page 334 • process-client-ie on page 334 SCALANCE WLC711 CLI Reference Guide...
  • Page 332 Enables or disables 802.11h support on the Wireless Appliance. Example The following example enables 802.11h support on the WLAN service: WLC.siemens.com :wlans:test:rf# 11h-support enable WLC.siemens.com :wlans:test:rf# apply WLC.siemens.com :wlans:test:rf# show 11h-support Enable 11h support: enable SCALANCE WLC711 CLI Reference Guide...
  • Page 333 802.11k support on AP 37xx and 38xx 11k-support appliances. The command is accessible from the wlan:<WLAN-service-name>:rf context 11k-support of the CLI. 11k-support enable | disable Parameters enable | disable Enables or disables 802.11k support on AP 37xx and 38xx appliances. SCALANCE WLC711 CLI Reference Guide...
  • Page 334 :wlans:CNL-7-CP:rf# process-client-ie enable WLC.siemens.com :wlans:CNL-7-CP:rf# apply show Use the command to display the current RF settings of the specified individual WLAN service. The show command is accessible from the wlan:<WLAN-service-name>:rf context of the CLI. show SCALANCE WLC711 CLI Reference Guide...
  • Page 335 The following example displays the current WLAN service settings for the WLAN service named “test”: WLC.siemens.com :wlans:test# show Service type: std Name: test Synchronize: disable Enable status: enable Wireless AP Services: Wireless AP: 04099202012xxxxx Wireless AP: 04099202012xxxxx Wireless AP: 05000092030xxxxx SSID: _ssidtest pre-authentication timeout(minutes): 5 SCALANCE WLC711 CLI Reference Guide...
  • Page 336 CLI. After you run the command, run the command to implement the changes. status apply status enable | disable Parameters enable | disable Enables or disables this WLAN service. SCALANCE WLC711 CLI Reference Guide...
  • Page 337 CLI. After you run the command, run the command to implement the changes. timeout-post apply timeout-post 0-999999 Parameters Specify the post-authentication timeout value in minutes for this WLAN service. 0-999999 SCALANCE WLC711 CLI Reference Guide...
  • Page 338 Parameters Specify the session timeout value in minutes for this WLAN service. 0-999999 Example The following example sets the session timeout value to never for this WLAN service: WLC.siemens.com :wlans:test# timeout-session 0 WLC.siemens.com :wlans:test# apply SCALANCE WLC711 CLI Reference Guide...
  • Page 339 Specifies that unauthenticated traffic is discarded. This is the default. discard-unauth- traffic Example The following example applies the non-authentication policy to unauthenticated traffic for this WLAN service: WLC.siemens.com :wlans:test# unauth-behaviour nonauth-policy WLC.siemens.com :wlans:test# apply WLC.siemens.com :wlans:test# show unauth-behaviour Unauthenticated Behaviour: nonauth-policy SCALANCE WLC711 CLI Reference Guide...

  • Page 340: Chapter 20: Topology Commands

    A.B.C.D./0-32) Parameters Specifies the name of the topology. topology name Specifies a Bridge Traffic locally at Controller topology. b@ac Specifies a Bridge Traffic locally at Access Point topology. b@ap Specifies a routed topology. routed SCALANCE WLC711 CLI Reference Guide...

  • Page 341: Delete

    The command is accessible from the delete delete topology context of the CLI. You cannot delete the Admin topology. Also, you cannot delete a topology that is in use by a policy. delete topology name SCALANCE WLC711 CLI Reference Guide...

  • Page 342: Internal-Vlanid

    | none Parameters Specifies the name of the physical topology to have multicast support. physical topology name Disables multicast-support. none Example This example enables multicast support on the phy1 topology: WLC.siemens.com :topology# multicast-support phy1 SCALANCE WLC711 CLI Reference Guide...

  • Page 343: Show

    344 — See on page 344 for commands in the topology:<named-topology>:l2 context. • on page 349 — See on page 349 for commands in the topology:<named-topology>:l3 context. • l3presence on page 370 • mode on page 370 SCALANCE WLC711 CLI Reference Guide...
  • Page 344 AP as an ARP proxy for this topology. Only APs arp-proxy to which this topology is applied are enabled/disabled as ARP proxies. The command is arp-proxy available from the topology:<named-topology>:l2: context of the CLI for b@ap topologies. SCALANCE WLC711 CLI Reference Guide...
  • Page 345 Spectralink SVP (224.0.1.116) • vocera: Vocera Mcst (230.230.0.0/20) • mdns mDNS/Bonjour (224.0.0.251) Specifies whether wireless replication is enabled. The default is off. on|off Example This example configures an existing multicast filter: WLC.siemens.com :topology:techpubs_test_ac:l2:multicast# config 1 225.1.1.0/32 on SCALANCE WLC711 CLI Reference Guide...
  • Page 346 Use the command to enable or disable multicast filtering support. The command is filter filter available from the topology:<named-topology>:l2:multicast context of the CLI for b@ac, b@ap, and routed topologies. filter enable | disable Parameters SCALANCE WLC711 CLI Reference Guide...
  • Page 347 WLC.siemens.com :topology:r1:l2:multicast# show Multicast support: disable port Use the command to assign a port to a topology. The command is available from the port port topology:<named-topology>:l2 context of the CLI for b@ac and physical topologies. SCALANCE WLC711 CLI Reference Guide...
  • Page 348 CLI for b@ap, b@ac, and physical topologies. tagged enable | disable Parameters Indicates that 802.1Q VLAN tagging will be enabled. enable Indicates that 802.1Q VLAN tagging will be disabled. disable Example Example code is not currently available. SCALANCE WLC711 CLI Reference Guide...
  • Page 349 367 for named toplogies with disabled l3presence. See l3presence on page 370. • nexthop on page 368 • ospf-advert on page 368 • ospf-cost on page 369 • show on page 369 SCALANCE WLC711 CLI Reference Guide...
  • Page 350 The name of the PKCS #12, PEM/DER, or CSR certificate file to use with the port. This filename must be a PKCS #12 file if the permanent option is not used. The PEM/DER encoded private key file keyfile Password to use with the private key file certpassword SCALANCE WLC711 CLI Reference Guide...
  • Page 351 The following example downloads a PEM/DER certificate file, a PEM/DER key file, and a chain certificate using FTP and applies it to the topology named test: WLC.siemens.com :topology:test:l3# cert per-der ftp 1.1.1.1 test abc123 /test t certificate.crt privatekey.key abc123 chain.crt Attempting to download file using ftp ... SCALANCE WLC711 CLI Reference Guide...
  • Page 352 The following commands are available in the topology:<named-topology>:l3: dhcp context. • dhcp-servers on page 353 • on page 353 • dls-address on page 354 • on page 354 • domain on page 355 • exclude on page 355 SCALANCE WLC711 CLI Reference Guide...
  • Page 353 This command is visible only when mode is set to local. See mode on page 358. After you run the command, run the command to implement the changes. apply dls enable | disable Parameters Enables DLS. enable Disables DLS. disable SCALANCE WLC711 CLI Reference Guide...
  • Page 354 After you run the command, run the command to implement the changes. apply dns (DNS server [,DNS server [...]]) | none Parameters Specifies the IP address of a DNS server. DNS server Clears the DNS server. none SCALANCE WLC711 CLI Reference Guide...
  • Page 355 Clears the IP addresses. delete A comment about the excluded IP address or range of IP addresses. comment comment string Example The following example excludes the address range 10.0.1.10–10.0.1.20: WLC.siemens.com :topology:test:l3:dhcp# mode local WLC.siemens.com :topology:test:l3:dhcp# exclude 10.0.1.10 10.0.1.20 SCALANCE WLC711 CLI Reference Guide...
  • Page 356 CLI for b@ac and physical topologies. For information about the command for the Admin topology, see gateway on page 364. gateway gateway A.B.C.D | none Parameters SCALANCE WLC711 CLI Reference Guide...
  • Page 357 See mode on page 358. After you run the command, run the command to implement the changes. lease-max apply lease-max int Parameters Specifies the time limit in seconds. SCALANCE WLC711 CLI Reference Guide...
  • Page 358 A.B.C.D A.B.C.D Parameters Specifies the first IP address in the IP address range. A.B.C.D Specifies the last IP address in the IP address range. A.B.C.D SCALANCE WLC711 CLI Reference Guide...
  • Page 359 Clears the IP addresses and indicates that no WINS server is present. none Examples The following example specifies the IP addresses of two WINS servers: WLC.siemens.com :topology:r1:l3:dhcp# mode local WLC.siemens.com :topology:r1:l3:dhcp# wins 192.168.1.3, 192.168.1.4 WLC.siemens.com :topology:r1:l3:dhcp# apply SCALANCE WLC711 CLI Reference Guide...
  • Page 360 TCP or UDP is the specified protocol. Valid port values are from 0–65535. (type 0-255 [0-255]) Specifies an ICMP type or range of ICMP types. This parameter is only valid when ICMP is the specified protocol. Valid values are from 0–255. SCALANCE WLC711 CLI Reference Guide...
  • Page 361 - Authentication Header protocol • esp - Encapsulating Security Payload protocol • none - No protocols • icmp - ICMP protocol • gre - Generic Route Encapsulation protocol Specifies the IPv4 IP address and mask. A.B.C.D/0-32 SCALANCE WLC711 CLI Reference Guide...
  • Page 362 CLI for b@ac, physical, and routed topologies. delete pos Parameters Specifies the position of the exception filter (0–255). Example The following example deletes the exception filter at position 2: WLC.siemens.com :topology:r1:l3:exceptions# delete 2 SCALANCE WLC711 CLI Reference Guide...
  • Page 363 Exception filter(I): 1031 proto udp 11.11.11.17 255.255.255.255 port 67 both allow Exception filter(I): 1032 proto udp 255.255.255.255 255.255.255.255 port 67 both allow Exception filter(I): 1033 proto icmp 11.11.11.17 255.255.255.255 port 0 255 both allow Exception filter(I): 1034 proto none 0.0.0.0 both deny SCALANCE WLC711 CLI Reference Guide...
  • Page 364 :topology:Admin:l3:# gateway none gateway-ipv6 Use the command to specify an IPv6 gateway IP address. The gateway-ipv6 gateway-ipv6 command is available from the topology:<named-topology>:l3 context of the CLI for the Admin topology only. gateway-ipv6 A:B:C:D:E:F:G:H | none SCALANCE WLC711 CLI Reference Guide...
  • Page 365 Once the CSR file has been created, you can copy it to an FTP or SCP server using the page 352 command copy-csr on page 352. You can apply the certificate with the page 350 command cert page 350. SCALANCE WLC711 CLI Reference Guide...
  • Page 366 :topology:Admin:l3:# ipv6 fd66:2280:2668::13/64 mgmt Use the command to allow or prohibit management traffic. The command is available from mgmt mgmt the topology:<named-topology>:l3 context of the CLI for b@ac, physical, and routed topologies. mgmt enable | disable SCALANCE WLC711 CLI Reference Guide...
  • Page 367 (netmask | CIDR | none) Parameters Specifies the netmask in dotted-decimal notation. netmask Specifies the number of bits in the netmask that make up the network ID. CIDR Specifies that no netmask is configured. none SCALANCE WLC711 CLI Reference Guide...
  • Page 368 After you run the command, run the command to implement the changes. ospf-advert apply ospf-advert enable | disable Parameters Enables OSPF advertisements. enable Disables OSPF advertisements. disable Example The following example enables OSPF advertisements: WLC.siemens.com :topology:r1:l3:# ospf-advert enable SCALANCE WLC711 CLI Reference Guide...
  • Page 369 MTU: 1500 The following example displays Layer 3 information for a b@ac topology: WLC.siemens.com :topology:bridged_ac1:l3# show Interface IP 0.0.0.0 0.0.0.0 AP Registration: disable Allow management traffic: disable Factory default certificate/key Strict Subnet Adherence: enable MTU: 1436 SCALANCE WLC711 CLI Reference Guide...
  • Page 370 The name name command is available from the topology:<named-topology> context of the CLI for b@ac, b@ap, and routed topologies. name topology name Parameters Specifies the name of the topology. topology name SCALANCE WLC711 CLI Reference Guide...
  • Page 371 The following example shows configuration information for a physical topology: WLC.siemens.com :topology:esa0# show Name: esa0 3rd party: disable The following example shows configuration information for a routed topology: WLC.siemens.com :topology:r1# show Topology mode: routed Synchronize: enable Name: r1 SCALANCE WLC711 CLI Reference Guide...

  • Page 372: Topology-Group

    MU Session Manager assigns a role, any topology group in the role will be replaced by a member topology contained in the group. If a topology group is referenced multiple times, only 1 topology from the group is selected. A different user could be assigned a different member topology SCALANCE WLC711 CLI Reference Guide...
  • Page 373 Parameters Specifies the name of the topology group. topology-group-name Example show Use the command to display information about a topology group. The command is available show show from the topology:topology-group context of the CLI. show SCALANCE WLC711 CLI Reference Guide...
  • Page 374 Specifies a topology name. topology_name [topology_name]* Optionally, specifies one or more additional topology names separated by a space. Usage The group member must have same topology mode type as the toplogy group. SCALANCE WLC711 CLI Reference Guide...
  • Page 375 CLI. vlanid id Parameters Specifies a VLAN ID number. Valid VLAN ID numbers are 1-4094. Usage The group member must have same topology mode type as the toplogy group. SCALANCE WLC711 CLI Reference Guide...
  • Page 376 Commands vlanid Example SCALANCE WLC711 CLI Reference Guide...

  • Page 377: Chapter 21: Location-Based-Service (Lbs) Commands

    The multicast multicast command is accessible from the lbs context of the CLI. multicast 0x:0x:0x:0x:0x:0x Parameters Specifies the multicast address of the location-based server, in hexadecimal format. 0x:0x:0x:0x:0x:0x SCALANCE WLC711 CLI Reference Guide...

  • Page 378: Port

    Use the command to enable or disable an AeroScout or Ekahau location-based service on the service Wireless Appliance. The command is accessible from the lbs context of the CLI. service service disable | aeroscout | ekahau SCALANCE WLC711 CLI Reference Guide...

  • Page 379: Server-Ip

    The following example sets the IP address of the AeroScout server to 192.168.3.100: WLC.siemens.com :lbs# service aeroscout WLC.siemens.com :lbs# server-ip 192.168.3.100 show Use the command to display information about the location-based service. The show command is show accessible from the lbs context of the CLI. show SCALANCE WLC711 CLI Reference Guide...

  • Page 380: Related Commands

    802.11n AP. See show on page 116. • ap:defaults:11n — Use the command in this context to display configuration information for all show 802.11n APs. See show on page 99. SCALANCE WLC711 CLI Reference Guide...

  • Page 381: Chapter 22: Web Commands

    Specifies time in number of minutes. Examples The following example sets the web session timeout to one hour and 30 minutes: WLC.siemens.com :web# guestportal-admin-timeout 01:30 The following example sets the web session timeout to 30 minutes: WLC.siemens.com :web# guestportal-admin-timeout 30 SCALANCE WLC711 CLI Reference Guide...

  • Page 382: Timeout

    Parameters None Examples The following example displays the VNS names in the Wireless AP SSID list on the controller’s user interface (Wireless AP screen): WLC.siemens.com :web# showvns SCALANCE WLC711 CLI Reference Guide...

  • Page 383: Show

    (Wireless AP screen): WLC.siemens.com :web# no showvns show Use the command to display the web settings. show show Parameters None Examples The following example displays the web settings: WLC.siemens.com :web# show timeout 34:0 showvns SCALANCE WLC711 CLI Reference Guide...

  • Page 384: Chapter 23: Cos Commands

    Parameters Specifies the name of the CoS. A CoS name can be made up of all alpha- cos-name numeric characters, as well as special characters: -!#$:. SCALANCE WLC711 CLI Reference Guide...

  • Page 385: Delete

    Specifies that information for the named cos be displayed. cos-name Examples The following example displays the current list of CoS configuration information: WLC.siemens.com :cos# show CoS name 802.1p ToS/DSCP Inbound Rate Profile Outbound Rate Profile No CoS lab10-c1 0x7C/0xFF Legacy CoS SCALANCE WLC711 CLI Reference Guide...

  • Page 386: Named-Cos

    The following example displays the my-cos CoS configuration from within the cos:<named-cos> context: WLC.siemens.com :cos# my-cos WLC.siemens.com :cos:my-cos# show Name: my-cos Use Legacy Priority Override defined in the WLAN Service: disable 802.1p Priority: none ToS/DSCP Marking: Mask: Inbound Rate Limit: Outbound Rate Limit: SCALANCE WLC711 CLI Reference Guide...
  • Page 387 Use Legacy Priority Override defined in the WLAN Service: disable 802.1p Priority: none ToS/DSCP Marking: Mask: Inbound Rate Limit: Outbound Rate Limit: Transmit Queue: none Synchronize: enable WLC.siemens.com :cos:your-cos# exit WLC.siemens.com :cos# my-cos WLC.siemens.com :cos:my-cos# SCALANCE WLC711 CLI Reference Guide...
  • Page 388 CoS is used instead. This is the default. Usage When WLAN marking is enabled, the WLAN service applies legacy priority override settings defined in WLAN Quality of Service (QoS) tables to received packets before sending them on. SCALANCE WLC711 CLI Reference Guide...
  • Page 389 WLAN marking is enabled, the ToS or DSCP value (only one or the other is present in the received packet) is taken from the WLAN. Enter the value/mask combination you want used. command is accessible from within the cos:<named-cos> context. tos-dscp-mask tos-dscp-mask (tos-dscp/mask) | none SCALANCE WLC711 CLI Reference Guide...
  • Page 390 Enable AP filtering: disable Synchronize: enable WLC.siemens.com :cos:my-cos# rateprf-out Use the command to configure an already existing rate profile for an outbound rate limit rateprf-out for CoS. The command is accessible from the cos:<named-cos> context. rateprf-out SCALANCE WLC711 CLI Reference Guide...
  • Page 391 0-7 | none Parameters Sets transmit queue for this CoS. No transit queue specified for this CoS. none Example The following example assigns transmit queue 3 to the CoS: WLC.siemens.com :cos:my-cos# transmit-queue 3 SCALANCE WLC711 CLI Reference Guide...

  • Page 392: Chapter 24: Site Commands

    394 for commands in the site:<named- site> context. create Use the command to create a new site, specifying a name for the new site. The create create command is accessible from the site context. create site-name SCALANCE WLC711 CLI Reference Guide...

  • Page 393: Delete

    Parameters Specifies that information for the named site be displayed. site-name Example The following example displays the current list of site configuration information: WLC.siemens.com :site# show site site name Site ID site1 site2 site3 SCALANCE WLC711 CLI Reference Guide...

  • Page 394: Named-Site

    • remove on page 405 • replace-station-id on page 405 • secure-tunnel on page 406 • secure-tunnel-ap on page 406 • secure-tunnel-control on page 407 • secure-tunnel-lifetime on page 407 • show on page 408 SCALANCE WLC711 CLI Reference Guide...
  • Page 395 (add|delete) policy-name Parameters add | delete Specifies whether to add or delete the policy. Specifies the policy to be assigned to or removed from the site. policy-name SCALANCE WLC711 CLI Reference Guide...
  • Page 396 You specify the WLAN by its name. If you enter the command without a <wlan-name>, the CLI displays a list of available WLANs by the names they were given when they were created. Example The following example shows a listing of available WLANs: WLC.siemens.com :site:site1# assign-wlan The available WLANs: WirelessWLAN C25TV1WLAN mitigatorWLAN SCALANCE WLC711 CLI Reference Guide...
  • Page 397 Enter to exit config config radius name config exit mode. Example The following example assigns RADIUS server R-1 to site1, and enters config mode for R-1: WLC.siemens.com :site:site1# config R-1 SCALANCE WLC711 CLI Reference Guide...
  • Page 398 WLC.siemens.com :site:site1# dns 192.168.001.002 WLC.siemens.com :site:site1# apply local-radius Use the command to enable or disable authentication by the defined local RADIUS local-radius server for this site. The command is accessible from the site:<named-site> context. local-radius SCALANCE WLC711 CLI Reference Guide...
  • Page 399 The following example moves the authentication server from position 1 to 2 in the order: WLC.siemens.com :site:site1# move 1 2 name Use the command to change the name of a site. The command is accessible from within the name name site:<named-site> context. SCALANCE WLC711 CLI Reference Guide...
  • Page 400 | vnsname Parameters Specifies an NAS identifier for this <named-site>. string Specifies that the VNS name is used as the NAS identifier for this <named-site>. vnsname SCALANCE WLC711 CLI Reference Guide...
  • Page 401 The CLI <named-site> context must be in config mode for a RADIUS server to execute the password command. Use the command to enter config mode. Use to exit config radius name config exit config mode. SCALANCE WLC711 CLI Reference Guide...
  • Page 402 The CLI <named-site> context must be in config mode for a RADIUS server to execute the protocol command. Use the command to enter config mode. Use config exit to exit config <radius name> config mode. Example The following example sets the authentication protocol to PAP: WLC.siemens.com :site:site1# protocol PAP SCALANCE WLC711 CLI Reference Guide...
  • Page 403 Load control can be enabled on one radio and disabled on the other. Members of a WLAN load control group are assigned to both radios and cannot be load controlled individually. radio1-loadcontrol (enable | disable) Parameters (enable | disable) Enables or disables the load control function on Radio1. SCALANCE WLC711 CLI Reference Guide...
  • Page 404 Enables or disables the strict enforcement of load limits on Radio1. Usage Radio Load Control must be enabled for this radio before this command can take effect. Example The following example enables strict load limiting on Radio1: WLC.siemens.com :site:site1# radio1-strictlimit enable SCALANCE WLC711 CLI Reference Guide...
  • Page 405 ID replacement with site replace-station-id name function. The command is accessible from the site:<named-site> context. replace-station-id replace-station-id (enable | disable) Parameters enable | disable Enables or disables the replacement of the call station ID with the site name. SCALANCE WLC711 CLI Reference Guide...
  • Page 406 (enable | disable) Parameters enable | disable Enables or disables secure tunnels between APs on this site. Usage command must be enabled before the command can be run. secure-tunnel secure-tunnel-ap SCALANCE WLC711 CLI Reference Guide...
  • Page 407 The default is 10 hours. When this value expires, the tunnel becomes disabled. Use the secure- command to terminate a tunnel. tunnel disable SCALANCE WLC711 CLI Reference Guide...
  • Page 408 Name Role NAS IP NAS ID Auth Type NPS_R2 auth Use VNS IP address Use VNS name MS-CHAP2 Secure Tunnel: enable Control Traffic Encryption(Controller): enable Control Traffic Encryption(APs): enable Replace Station ID: enable WLC.siemens.com :site:site1# SCALANCE WLC711 CLI Reference Guide...

  • Page 409: Chapter 25: Rf Location Commands

    413 • show on page 414 location-engine Use the command to enable or disable the RF Location engine on this controller. location-engine command is accessible from the location context of the CLI. location-engine SCALANCE WLC711 CLI Reference Guide...

  • Page 410: Default-Height

    RF Location engine tracks and reports the location of all associated users (users with sessions on the controller), up to the system limit (2,500). command is accessible from the location context. auto-tracking auto-tracking (enable | disable) SCALANCE WLC711 CLI Reference Guide...

  • Page 411: Default-Env-Mode

    The following commands are available in the location:floor-plan context: • copy on page 28 • delete on page 413 • on page 16 • exit on page 17 • export on page 412 • help on page 17 • import on page 412 SCALANCE WLC711 CLI Reference Guide...
  • Page 412 This command converts the XML file image to copy [stream] an internal representation named <filename> (minus the .xml extension). Examples The following example creates a floor plan called “Salem-third-floor” from the Salem-third-floor.xml file: WLC.siemens.com :location:floor-plan# import Salem-third-floor.xml SCALANCE WLC711 CLI Reference Guide...

  • Page 413: On-Demand

    The following example adds client with MAC address 00:1B:21:31:CF:31 for on-demand tracking: WLC.siemens.com :location# on-demand add 00:1B:21:31:CF:31 publish Use the command to enter the publish context. The command is accessible from publish publish the location context of the CLI. SCALANCE WLC711 CLI Reference Guide...

  • Page 414: Show

    RSS readings per second. The show command is accessible from the location context of the CLI. Syntax show Parameters None. Example The following example displays information for the location of users: WLC.siemens.com :location# show SCALANCE WLC711 CLI Reference Guide...

  • Page 415: Chapter 26: Publish Commands

    (enable | disable) Parameters enable | disable Enables or disables the push operation on this controller. Examples The following example enables the push operation on this controller: WLC.siemens.com :location:publish# push enable SCALANCE WLC711 CLI Reference Guide...

  • Page 416: Interval

    The following example sets the push unit to meters: WLC.siemens.com :location:publish# unit 0 push-list Use the command to configure a push URL list. This command is available from the push-list location:publish context. push-list [add | delete] url [url]*> SCALANCE WLC711 CLI Reference Guide...
  • Page 417 [url]* Specifies one or more URLs, delineated by a space, to add to the location push list. Examples The following example adds the www.myurl.com URL to the push list: WLC.siemens.com :location# push-list add www.myurl.com. SCALANCE WLC711 CLI Reference Guide...

Table of Contents