Siemens scalance WLC711 Reference Manual page 32

domain domain name | none
Parameters
domain name
none
Examples
The following example specifies what the domain name of the controller:
WLC.siemens.com
WLC.siemens.com
dns
Use the command at the host-attributes context to move into DNS server configuration context.
dns
The following commands are available in the host-attributes:dns context:
•
dns on page 32
•
move on page 32
dns
Use the command in the host-attributes:dns context to configure DNS servers for the controller.
dns
You can configure up to three DNS servers to resolve RADIUS server host names to their corresponding
IP addresses. Use the no form of the command to remove a DNS server configuration.
After you have run the
dns 1-3 ip address no dns 1-3 ip address
Parameters
1-3
ip address
Examples
The following example defines a DNS server, with a 192.1.1.3 IP address, as the first DNS server:
WLC.siemens.com
move
Use the command in the dns context to reposition DNS servers in the DNS server list.
move
After you have run the
SCALANCE WLC711 CLI Reference Guide
Specifies the domain name of the controller.
Removes the configured domain name.
:host-attributes# domain
:host-attributes# apply
command, run the
dns apply
Specifies the position of the DNS server in the DNS servers list.
Specifies the IP address of the DNS server. The IP address can be either IPv4
A.B.C.D or IPv6 A:B:C:D:E:F:G:H format.
:host-attributes:dns# dns 1 192.1.1.3
command, run the
move
siemens.com
command to implement the changes.
command to implement the changes.
apply
root Commands
dns
32