Named-Cos - Siemens scalance WLC711 Reference Manual

<named-cos>
The
<named-cos>
to the cos:<named-cos> context.
The cos:<named-cos> context provides commands for the configuration of the <named-cos>. A
<named-cos> must first be created using the
becomes available as a command, allowing access to the cos:<named-cos> context for that CoS. For
example, to enter the <named-cos> context for the cos named my-cos, use the command my-cos from
the cos context, created using the
After you complete configuration changes for a <named-cos>, run the
the cos:<named-cos> context to implement the changes.
The following commands are available in the cos:<named-cos> context.
•
show on page 386
•
name on page 387
•
sync on page 388
•
use-wlan-marking
•
priority on page 389
•
tos-dscp-mask
•
rateprf-in on page 390
•
rateprf-out on page 390
•
transmit-queue
show
Use the command to display the <named-cos> configuration information for the current
show
cos:<named-cos> context. The
show
Parameters
None.
Examples
The following example displays the my-cos CoS configuration from within the cos:<named-cos>
context:
WLC.siemens.com
WLC.siemens.com
Name: my-cos
Use Legacy Priority Override defined in the WLAN Service: disable
802.1p Priority: none
ToS/DSCP Marking:
Mask:
Inbound Rate Limit:
Outbound Rate Limit:
SCALANCE WLC711 CLI Reference Guide
command, where <named-cos> refers to the name of a given CoS, provides access
create <cos-name>
on page 388
on page 389
on page 391
command is accessible from within the cos:<named-cos> context.
show
:cos# my-cos
:cos:my-cos# show
command in the cos context. Once created it
create
command.
apply
cos Commands
<named-cos>
command before exiting
386