Siemens scalance WLC711 Reference Manual page 311
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
vsa-ssid
Use the
vsa-ssid
command is accessible from the wlan:<WLAN-service-name>:auth context of the CLI.
vsa-ssid
After you run the
vsa-ssid
vsa-ssid enable | disable
Parameters
enable | disable
Usage
The
command is not available when the authentication mode is guestportal. When the
vsa-ssid
authentication mode is disabled, MAC must be enabled for this command to be available. For more
information, see
mode
Example
The following example enables the inclusion of SSID information in messages to the RADIUS server:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
SSID as VSA attribute: enable
vsa-topology
Use the
vsa-topology
server. The
vsa-topology
of the CLI.
After you run the
vsa-topology
vsa-topology enable | disable
Parameters
enable | disable
Usage
The
vsa-topology
authentication mode is disabled, MAC must be enabled for this command to be available. For more
information, see
mode
SCALANCE WLC711 CLI Reference Guide
command to include SSID information in the message to the RADIUS server. The
command, run the
Specifies to enable or disable the inclusion of SSID information in
messages to the RADIUS server.
on page 302.
:wlans:test:auth# vsa-ssid enable
:wlans:test:auth# apply
:wlans:test:auth# show vsa-ssid
command to include topology information in the message to the RADIUS
command is accessible from the wlan:<WLAN-service-name>:auth context
command, run the
Specifies to enable or disable the inclusion of Topology information in
messages to the RADIUS server.
command is not available when the authentication mode is guestportal. When the
on page 302.
command to implement the changes.
apply
command to implement the changes.
apply
wlans Commands
vsa-ssid
311
Advertisement
Table of Contents
