Siemens scalance WLC711 Reference Manual page 150

Example
The following example provides a description for a Wireless AP
WLC.siemens.com
Blue Office
leftantenna-radio2
Use the
leftantenna-radio2
command without arguments to list the available antenna models. The
command is accessible from the ap:<serial> context of the CLI if the AP supports configuration of a left
antenna radio2. Additionally, for AP models that support the Professional Install feature,
leftantenna-radio2
The antenna commands available are dependent on the AP type.
leftantenna-radio2 antenna_model
Parameters
antenna_model
Examples
This example lists the valid antenna models that can be entered with this command, then executes the
command with an appropriate model number:
WLC.siemens.com
radio2 <antenna_model>
antenna_model:
<list of valid antenna models>
No Antenna
WS-AO-2S03360 G 3.5 dBi Omni
WLC.siemens.com
dBi Omni
This example removes a configured left radio2 antenna:
WLC.siemens.com
location
Use the
location
accessible from the ap:<serial> context of the CLI.
location location | no location
SCALANCE WLC711 CLI Reference Guide
:ap:0500008043050212# desc This Access Point belongs to the
command to select an antenna supported by the Wireless AP. Enter the
is also accessible from the ap:<serial>:professional_antenna# context.
Model name of an antenna supported by the Wireless AP.
:ap:0500010032150135# leftantenna-radio2 Usage: leftantenna-
:ap:0500010032150135# leftantenna-radio2 WS-AO-2S03360 G 3.5
:ap:0500010032150135# leftantenna-radio2 No Antenna
command to set the location string for the specified AP. The
ap Commands
leftantenna-radio2
leftantenna-radio2
command is
location
150