Siemens scalance WLC711 Reference Manual page 288

add-ip-port
Use this command enable or disable the ability to add a controller IP address and port to the
redirection URL. The add-ip-port command is available in the wlan:<WLAN-service-
name>:auth:captiveportal context for external captive portal mode only.
add-ip-port enable | disable
Parameters
enable
disable
copy-cpfile
Use this command to download a zip file containing customized web pages. The
command is available from the wlan:<WLAN-service-name>:auth:captiveportal context.
copy-cpfile scp|ftp server user password dir file
Parameters
scp | ftp
server
user
password
dir
file
Example
This example uses FTP to copy the file "cpcustom.zip" located in the /tmp directory on FTP server
192.168.3.10, using log in credentials "root" and "mypasswd":
WLC.siemens.com
192.168.3.10 root mypasswd /tmp cpcustom.zip
cp-ssl
Use the command to enable or disable HTTPS support on a WLAN service configured for
cp-ssl
external authentication. The
information about the
cp-ssl enable|disable
Parameters
enable
disable
SCALANCE WLC711 CLI Reference Guide
Enable adding a controller IP address and port to the redirection URL.
Disable adding a controller IP address and port to the redirection URL. This is the
default.
Specifies whether to use FTP or SCP to download the file.
The IP address of the FTP or SCP server.
The user name to log in to the server.
The password for file transfer protocol.
The directory on the server where the file is located.
The name of the file containing the web pages.
:wlans:Lab126-12-Int-CP:auth:captiveportal# copy-cpfile ftp
command is available only if mode is set to external. For more
cp-ssl
command, see mode
mode
Enable HTTPS support on the WLAN service configured for external
authentication.
Disable HTTPS support on the WLAN service configured for external
authentication.
on page 302.
wlans Commands
add-ip-port
copy-cpfile
288